Strain Monitoring on PHC Pipe Piles Based on Fiber Bragg Grating Sensors
- 1 April 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 33 (2)
Abstract
Fiber Bragg grating (FBG) sensors emerged as a relatively new strain-sensing technology for civil engineering applications. This study presents a field test to assess the feasibility of FBG sensors in monitoring the strain profile of prestressed high-strength concrete (PHC) pipe piles during installation. Two open-ended PHC pipe piles were instrumented with FBG sensors and then driven into the ground using a hydraulic jacking machine. To measure the strain profile along the test piles, nine FBG sensors were arranged in a single optical fiber and then mounted on one pile at the opposite side to monitor the strain at different levels as a function of wavelength shift. The procedure for installing the FBG sensors along the PHC pipe piles is introduced first. Next, the distribution of the axial forces and average side shear stresses that were evaluated from the strain measurements of the FBG sensors are discussed. The field test results indicate that the FBG sensor system was suitable for monitoring the strain state of PHC pipe piles during installation. The axial forces and side shear stresses along the test piles were influenced significantly by the penetration depth and the local soil resistance.Keywords
This publication has 20 references indexed in Scilit:
- Application of a distributed optical fiber sensing technique in monitoring the stress of precast pilesSmart Materials and Structures, 2012
- Monitoring Twin Tunnel Interaction Using Distributed Optical Fiber Strain MeasurementsJournal of Geotechnical and Geoenvironmental Engineering, 2012
- Field study of construction effects in jacked and driven steel H-pilesGéotechnique, 2009
- Distributed Strain Measurement in Steel Bridge with Fiber Optic Sensors: Validation through Diagnostic Load TestJournal of Performance of Constructed Facilities, 2008
- Performance of bored piles with different construction methodsProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2006
- Distributed strain measurement for pile foundationsProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2006
- Measurement of pile load transfer using the Fiber Bragg Grating sensor systemCanadian Geotechnical Journal, 2004
- Analysis of Fiber Optic Traffic Sensors in Flexible PavementsJournal of Transportation Engineering, 2003
- Formation of Bragg gratings in optical fibers by a transverse holographic methodOptics Letters, 1989
- Characterization of single-mode optical fiber filtersApplied Optics, 1981