Activation Potential of Various Activators for Ferronickel Slag Under Steam Curing: Characterization of Hydration Products and Mechanical Properties
Open Access
Abstract
This study investigates the activation potential of various activators for ferronickel slag (FNS) and the associated phase evolution. First, the existing forms of MgO in FNS were identified by analyzing its phase composition across different particle sizes. Subsequently, FNS was activated using six types of activators—Ca(OH)2, CaO, NaOH, KOH, Na2CO3, and a Ca(OH)2–gypsum composite—under steam curing at 80 °C for 7 days. The setting time, fluidity, hydration products, and mechanical properties of the activated systems were systematically examined. The results show that finer water-cooled FNS particles contain abundant amorphous phases, including amorphous MgO, which can react with Ca-based activators to form hydrotalcite—a reaction not observed with Na- or K-based activators. Compared with Na- or K-based activators, Ca-containing activators, particularly the Ca(OH)2–gypsum combination, exhibited superior activation performance. In addition, distinct microstructures were observed: NaOH activation promoted the formation of a yarn ball-like N–A–S–H gel, while KOH activation led to a knotted-fiber-bundle-like K–A–S–H phase, the latter showing potential for enhancing the crack resistance of cement-based materials. These findings provide new insights into the activator-dependent hydration mechanisms of FNS and support its value-added utilization in sustainable construction materials.Keywords
Funding Information
- National Natural Science Foundation of China (No.52304160)
- Huai'an Basic Research Program (Joint Special Project No. HABL2023013)
- Jiangsu province construction system science and technology project (No. 2023ZD123, 2024ZD130, 2024ZD131)
This publication has 73 references indexed in Scilit:
- Does non-negligible aluminum in SCMs play a positive role in the resistance of aluminum-rich C-A-S-H materials to chloride attack?Advanced Composites and Hybrid Materials, 2026
- The effect of metakaolin upon the formation of ettringite in metakaolin–lime–gypsum ternary systemsJournal of Thermal Analysis and Calorimetry, 2017
- Surface Properties of a Hooked Steel Fiber and their Effects on the Fiber Pullout and Composite Cracking 1. Experimental StudyMechanics of Composite Materials, 2014
- Evaluation of pozzolanic activity and physicomechanical characteristics in metakaolin-lime pastesJournal of Thermal Analysis and Calorimetry, 2006
- Mechanism of expansion of concrete due to the presence of dead-burnt CaO and MgOCement and Concrete Research, 1995
- Factors affecting the strength of alkali-activated slagCement and Concrete Research, 1994
- The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (C-S-H) phaseCement and Concrete Research, 1994
- Solid solution of ettringites part I: incorporation of OH− and CO32- in 3CaO.A12O3.32H2OCement and Concrete Research, 1990
- On the hydration of MgO in cement pastes hydrated up to eight yearsCement and Concrete Research, 1985
- Thermodynamic properties and phase transitions of salt hydrates between 270 and 400 K II. Na2CO3 · H2O and Na2CO3 · 10H2OThe Journal of Chemical Thermodynamics, 1983