Microstructure and Thermal Stability of High‐Temperature Titanium Alloy with Hf Element
Authors:
- 1 June 2022
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (11)
Abstract
The influence of partial substitution of Hf for Zr on the microstructure and thermal stability of near‐α high‐temperature titanium alloys is systematically investigated. The results show that the addition of Hf promotes the refinement of precipitated phases of the silicides and α2 phase and the (Ti,Zr,Hf)6(Si,Sn)3 S2‐type silicides were formed in alloys after aging treatment. During thermal exposure, both silicides and α2 phase in alloy with 2.5 wt% Hf exhibited excellent anti‐coarsening ability, which may be attributed to the slow diffusion of Hf in Ti that significantly inhibited the growth rate of the precipitated phase. The loss of plasticity of near‐α titanium alloys after thermal exposure is mainly due to the precipitation and coarsening of silicides and α2 phase, therefore, the Hf‐containing titanium alloy has more excellent thermal stability, i.e., the plasticity loss rate is decreased from 34.8% (the alloy without Hf) to 7.4% (the alloy with 2.5 wt% Hf).Keywords
Funding Information
- National Natural Science Foundation of China (Grant No. 91860113)
- Natural Science Foundation of Beijing Municipality (Grant No. 2202007)
This publication has 29 references indexed in Scilit:
- Influence of thermal exposure on the tensile properties and microstructures of Ti60 titanium alloyMaterials Science and Engineering: A, 2011
- The effect of heat treatment on thermal stability of Ti matrix compositeJournal of Alloys and Compounds, 2011
- Research on thermal stability of Ti40 alloy at 550°CMaterials Science and Engineering: A, 2008
- Effect of carbon and aging treatment on precipitation of ordered α2 in Ti–5.6Al–4.8Sn–2Zr–1Mo–0.35Si–0.7Nd alloyMaterials Science and Engineering: A, 2005
- Acicular α2 precipitation induced by capillarity at α/β phase boundaries in Ti–14Al–2Zr–3Sn–3Mo–0.5Si titanium alloyActa Materialia, 2003
- Characteristics of microstructures and second-phase particles in Y-bearing Ti-1100 alloyMaterials Science and Engineering: A, 2002
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996
- Zr diffusion in α-ti measured by RBS and HIRBSJournal of Nuclear Materials, 1994
- Measurements of Hf diffusion in α-Ti by HIRBSJournal of Nuclear Materials, 1993
- Precipitation of the ordered Ti3Al phase in alloy Ti6.3Al2Zr3.3MoO.3OSiScripta Metallurgica, 1986