Low‐velocity impact properties of carbon fiber/ultrahigh molecular weight polyethylene fiber hybrid composites
- 21 September 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (12) , 9114-9128
Abstract
To understand the hybrid fiber enhanced impact‐resistance performance of composite laminates. In particular, the effects of different parameters, such as hybrid fiber ratios and plying modes, were investigated. The effects of UHMWPE short fibers (UHMWPESFs) fiber content and ply angle changes on the impact resistance of Carbon fiber/ultra‐high molecular weight polyethylene short fiber hybrid composite (CUFHRP) laminates were investigated in this article. The impact resistance of the CUFHRP laminate was tested by the drop weight test and residual strength test after impact. The results indicated that the peak load and absorption energy of the specimen with a fiber content of 15 g/m 2 were the highest, reaching 6.543 kN and 16.51 J, respectively. Specimens with different ply modes of [0/−45/45/90] 2s showed the most obvious effect on the maximum load. Its maximum load was 28.93% higher than that of the original sample. The critical damage threshold load of composite laminates is improved, and the impact resistance is strengthened. Highlights: Study to improve the impact resistance of the composite on the basis of the hybrid structure. Report the optimal parameters of the effects on the impact resistance of the composite, such as: hybrid fiber ratios and plying modes. Reveal the fundamental failure mode of hybrid structure composite laminates under low‐velocity impact.Keywords
Funding Information
- National Natural Science Foundation of China (11802192)
- Natural Science Foundation of Jiangsu Province (BK 20220167, BK 20180244)
This publication has 18 references indexed in Scilit:
- Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a reviewThe International Journal of Advanced Manufacturing Technology, 2019
- Mechanical properties of hybrid composites reinforced by carbon and basalt fibersInternational Journal of Mechanical Sciences, 2018
- Electrospun nanofiber reinforced composites: a reviewPolymer Chemistry, 2018
- Energy Absorption Characteristics of Carbon /Epoxy Nano Filler Dispersed Composites Subjected to Localized Impact LoadingProcedia Engineering, 2017
- Internal Damage Investigation of Composites Subjected to Low-Velocity ImpactExperimental Techniques, 2016
- Failure analysis of carbon fiber reinforced composite subjected to low velocity impact and compression after impactJournal of Reinforced Plastics and Composites, 2016
- Experimental and numerical investigation of interply hybrid composites based on woven fabrics and PCBT resin subjected to low-velocity impactComposite Structures, 2015
- Preparation of ultra high molecular weight polyethylene with MgCl2/TiCl4 catalyst: effect of internal and external donor on molecular weight and molecular weight distributionPolymer Bulletin, 2010
- Low-velocity impact and residual tensile strength analysis to carbon fiber composite laminatesMaterials & Design (1980-2015), 2010
- Low velocity impact of combination Kevlar/carbon fiber sandwich compositesComposite Structures, 2005