The Effect of Si and Mg on Age Hardening Behavior of Al-SiCp Composites
Authors:
- 1 October 2003
- journal article
- other
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 37 (20) , 1791-1800
Abstract
An investigation was carried out to determine the effect of Si and Mg on ageing behavior of Al-7%Si-0.7%Mg matrix composites reinforced with SiC particles of 10 and 20 vol.% and unreinforced matrix alloy. The samples were produced by compocasting technique and extruded. The produced samples were characterized by optical microscope, image analyzer, scanning electron microscope and X-ray mapping. The obtained results were compared with the previous study, which was studied on Al-5%Si-0.2%Mg matrix alloy and composites. It has been found that, the formation of some reaction products, mechanical properties and age hardening behavior of the composites strongly depend on Si and Mg content of the matrix alloy. In addition, increasing the Mg and Si content from 0.2 and 5 wt.% to 0.7 and 7 wt.% respectively, increase the critical temperature and hardening efficiency values.Keywords
This publication has 26 references indexed in Scilit:
- An experimental study on deformation behavior below 0.2% offset yield stress in some SiCp/Al composites and their unreinforced matrix alloysMaterials Science and Engineering: A, 2001
- Influence of aging parameters on the mechanical properties of 6063 aluminium alloyJournal of Materials Processing Technology, 2000
- Influence of SiC particles on mechanical properties of Mg based compositeComposite Structures, 1999
- Control of the interface in SiC/Al compositesScripta Materialia, 1999
- Precipitation hardening in aluminum alloy 6022Scripta Materialia, 1999
- DSC analyses of the precipitation behavior of two Al–Mg–Si alloys naturally aged for different timesMaterials Letters, 1998
- β′ and β precipitation in an Al–Mg alloy studied by DSC and TEMActa Materialia, 1998
- Calorimetric study of 6061-Al–15 vol.% SiCw PM composites extruded at different temperaturesMaterials Science and Engineering: A, 1998
- The production of AlSi alloy-SiCp composites via compocasting: some microstructural aspectsMaterials Science and Engineering: A, 1996
- Aging behavior of powder metallurgy compositeScripta Metallurgica et Materialia, 1992