Cold‐cured epoxy‐silica hybrids: Effects of large variation in specimen thickness on the evolution of the Tg and related properties
- 29 September 2010
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 51 (2) , 358-368
Abstract
Experimental organic–inorganic hybrid systems, based on silane functionalized difunctional and trifunctional epoxy resins and an alkoxysilane precursor mixture, containing small amounts of ammonium molybdate, are evaluated for potential use as adhesives cured at ambient temperatures. The precursor resin mixtures are found to exhibit a large increase in viscosity with a pseudoplastic behavior. Scanning electron microscopy (SEM) analysis shows the existence of siloxane domains with nanometric dimensions, except for the presence of microscopic molybdate particles. By monitoring the evolution of the glass transition temperature (Tg) during curing, varying the thickness of the specimens between 0.2 and 4.5 mm, it is found that the organic–inorganic hybrids display a significant increase in the final Tg over the parent unmodified epoxy resins, particularly in thin specimens and when ammonium molybdate is added. Small‐angle X‐ray scattering (SAXS) spectra show that the dimensions and typographic features of thick and thin specimens are similar, both containing an agglomeration of primary particles of 5–6 nm. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics EngineersKeywords
This publication has 25 references indexed in Scilit:
- Effects of Water Content in in-situ Preparution of Epoxy/Silica Hybrid MaterialsKOBUNSHI RONBUNSHU, 2007
- Water effects on the bond strength of concrete/concrete adhesive jointsConstruction and Building Materials, 2006
- Network density control in epoxy–silica hybrids by selective silane functionalization of precursorsAdvances in Polymer Technology, 2005
- Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and propertiesPolymer, 2004
- Physical aging for an epoxy network diglycidyl ether of bisphenol A/m-xylylenediaminePolymer, 2003
- Erasure below glass‐transition temperature of effect of isothermal physical aging in fully cured epoxy/amine thermosetting systemJournal of Applied Polymer Science, 2001
- Rheological study of crosslinking and gelation in bismaleimide/cyanate ester interpenetrating polymer networkJournal of Applied Polymer Science, 2001
- Cold-Curing Epoxy Resins: Aging and Environmental Effects. I - Thermal PropertiesJournal of Polymer Engineering, 2001
- Organic-Inorganic Hybrid Materials: From “Simple” Coordination Polymers to Organodiamine-Templated Molybdenum OxidesAngewandte Chemie International Edition, 1999
- Chemistry And Applications Of Inorganic-Organic Polymers (Organically Modified Silicates)MRS Proceedings, 1986