Finite element and ANN-based prediction of bearing capacity of square footing resting on the crest ofc-φsoil slope
- 15 February 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 14 (2) , 176-187
Abstract
For footings located on or near a slope, the slope face acts as a finite boundary that leads to an inadequate development of the resisting passive zone. Depending upon the footing location and slope inclination, the outward deformation of the soil from beneath the loaded footing might lead to substantial reduction in the bearing capacity. A series of finite element analysis has been carried out using Plaxis 3D vAE.01 to investigate the bearing capacity of a square footing placed on crest of the slope. The effect of various geotechnical and geometrical parameters of the footing has also been investigated. Based on the simulated outcomes, an optimal 7-10-1 artificial neural network (ANN) architecture has been developed for the direct prediction of bearing capacity based on the input parameters. Sensitivity analysis conducted using Garson’s algorithm and connection weight approach revealed that angle of internal friction of the slope constituent material and the embedment depth have the highest importance ranking.Keywords
This publication has 29 references indexed in Scilit:
- Prediction of Field Hydraulic Conductivity of Clay Liners Using an Artificial Neural Network and Support Vector MachineInternational Journal of Geomechanics, 2012
- Artificial neural network (ANN) models for determining hydraulic conductivity of compacted fine-grained soilsCanadian Geotechnical Journal, 2009
- ANN-based model for predicting the bearing capacity of strip footing on multi-layered cohesive soilComputers and Geotechnics, 2009
- Prediction of residual friction angle of clays using artificial neural networkEngineering Geology, 2008
- Undrained lateral load capacity of piles in clay using artificial neural networkComputers and Geotechnics, 2006
- Shape Factors for Limit Loads on Square and Rectangular FootingsJournal of Geotechnical and Geoenvironmental Engineering, 2005
- An accurate comparison of methods for quantifying variable importance in artificial neural networks using simulated dataEcological Modelling, 2004
- Prediction of pile bearing capacity using artificial neural networksComputers and Geotechnics, 1996
- Limit load in translational failure mechanisms for associative and non-associative materialsGéotechnique, 1993
- The Ultimate Bearing Capacity of FoudationsGéotechnique, 1951