Effect of molybdenum disulfide functionalized multiwalled carbon nanotubes based hybrid on morphology, mechanical and thermal properties of epoxy nanocomposites
Authors:
- 30 May 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (13) , 11743-11766
Abstract
Three‐dimensional molybdenum disulfide (MoS2) functionalized MWCNTs hybrid nanoparticles were synthesized using in‐situ hydrothermal reaction. Two types of hybrids, MoS2/MWCNTs‐1 and MoS2/MWCNTs‐2 with MWCNTs to MoS2 precursor weight ratios 1:2 and 1:1 respectively were prepared with varying degrees of hybridization and the effects of their incorporation on tensile strength and fracture toughness properties of epoxies were investigated. Epoxy/MoS2/MWCNTs‐2 nanocomposites showed exceptional mechanical properties due to their improved dispersion, constrained chain mobility and excellent interfacial interactions. MoS2/MWCNTs‐2 nanocomposites showed maximum improvement of tensile strength by 28.52% at 0.5 wt% nanofiller concentration and the highest improvements in fracture toughness by 172% at 0.2 wt% nanofiller concentration. The excellent enhancement of fracture toughness properties was due to the synergic effect of MoS2/MWCNTs hybrid nanoparticles due to the crack pinning and bifurcation properties of MoS2 nanoparticles along with the pull‐out and crack bridging mechanisms of MWCNTs as observed in morphological analysis of fractures nanocomposites. The incorporation of 0.2 wt% of MoS2/MWCNTs‐2 increased the degradation temperatures of epoxy from 591 to 796°C at 95% weight loss due to the improved physical barrier effect.Highlights: MoS2/MWCNTs nanoparticles were synthesized using in‐situ hydrothermal reaction 0.5 wt% MoS2/MWCNTs‐2 incorporated epoxies showed highest tensile strength 0.2 wt% MoS2/MWCNTs‐2 incorporated epoxy composites show improved K1c value Incorporation of MoS2/MWCNTs improved the thermal stability of epoxy Synergistic effect of nanocomposite due to crack pinning, bifurcation & bridgingKeywords
Funding Information
- VIT University (SG20220116)
This publication has 59 references indexed in Scilit:
- Strength enhancement of a flame‐retardant hybrid composite by incorporating graphene nanoparticles for structural applicationsPolymer Composites, 2024
- Investigation on the effect of multiwalled carbon nanotubes in carbon fiber‐reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum baggingPolymer Composites, 2023
- Molybdenum disulfide polymeric nanoarchitectures and applications: A reviewPolymer Engineering & Science, 2023
- Graphene/epoxy nanocomposites for improved fracture toughness: A focused review on toughening mechanismChemical Engineering Journal Advances, 2023
- Probing on crystallographic structural and surface morphology of hydrothermally synthesized MoS2 nanoflowers consisting of nanosheetsApplied Surface Science Advances, 2021
- Fabrication of water-resistant epoxy nanocomposite with improved dynamic mechanical properties and balanced thermal and dimensional stability: Study on dual role of graphene oxide nanosheets and barium oxide microparticlesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Synergistic effects of multiwalled carbon nanotube/molybdenum disulfide hybrid particles on the mechanical and wear performance of epoxyPolymer Composites, 2018
- Tribological performance of the epoxy-based composite reinforced by WS2 fullerene-like nanoparticles and nanotubesPhysica Status Solidi (a), 2013
- Nanoinduced morphology and enhanced properties of epoxy containing tungsten disulfide nanoparticlesPolymer Engineering & Science, 2013
- Effects of surface modification on rheological and mechanical properties of CNT/epoxy compositesCarbon, 2006