Dynamic Stress Formation During Catalytic Combustion of Methane in Ceramic Monoliths
Authors:
- 1 January 1997
- journal article
- research article
- Published by Taylor & Francis in Combustion Science and Technology
- Vol. 122 (1-6) , 257-303
Abstract
Catalytic combustion of methane can generate thermal gradients that are large enough to shatter monoliths during several transient operating modes. This paper presents simulations from a 2-D transient numercial model of the transport and surface chemistry in a passage in a catalytic monolith, including convection and diffusion in the gas phase and heterogeneous reactions on the monolith walls. Rates of surface methane oxidation are based on reaction kinetics for a supported Pd'O catalyst assigned from differential reactor measurements. A thermal stress analysis package uses the predicted temperature profiles to calculate stress formation profiles in the monolith. The model neglects homogeneous reactions, but nevertheless describes the essential features of transient operating modes that generate the largest thermal stresses. Simulations are reported for inlet methane concentrations from 3 to 5 vol% in air and inlet temperatures from 300 to saoae. Results illustrate dynamic stress formation during combustor warm-up, cool-down and cycling of the inlet methane concentration. including cases with thermal stresses as high as 630 MPa, which exceed the fracture strength of typical monolith materials such as mullite and cordierite. The highest thermal stresses form perpendicular to the flow direction during warm-up transients. and would tend to crack the monolith walls along their axes.Keywords
This publication has 23 references indexed in Scilit:
- Transient Experiments and Modeling of the Catalytic Combustion of Methane in a Monolith ReactorIndustrial & Engineering Chemistry Research, 1996
- Analysis of multidimensional models of monolith catalysts for hybrid combustorsAIChE Journal, 1995
- Catalytic Materials for High-Temperature CombustionCatalysis Reviews, 1993
- Methane Oxidation over Noble Metal Catalysts as Related to Controlling Natural Gas Vehicle Exhaust Emissions1992
- Stabilization of alumina toward thermal sintering by silicon additionJournal of Catalysis, 1991
- Effect of catalyst structure on methane oxidation over palladium on aluminaJournal of Catalysis, 1990
- Catalytically stabilized combustionProgress in Energy and Combustion Science, 1986
- Mathematical models of the monolith catalytic converter: Part III. Hysteresis in carbon monoxide reactorAIChE Journal, 1979
- The catalytic combustor - An approach to cleaner combustion (by reaction control in gas turbine engines)Journal of Energy, 1978
- High‐Temperature Mechanical Properties of Mullite Under CompressionJournal of the American Ceramic Society, 1977