Abstract
Traditional residual life assessment (RLA) of creep-resistant steels relies on precipitate evolution or parametric equations; however, these approaches often fail to accurately determine the RL of materials under creep conditions. In this regard, the present study investigated the fundamental microstructural mechanisms governing creep damage in a 2.25Cr-1Mo steel after 280,000 hours of service. Ex-service samples were subjected to creep rupture tests at 500°C under stresses ranging from 137 to 177 MPa. It was observed in the post creep test microstructure that dislocation rearrangement during creep promotes the formation of low-angle grain boundaries that impinge on high-angle grain boundaries. This process leads to strain-induced boundary migration, resulting in grain boundary bulging— which leads to dynamic recrystallization. Another result from this interaction between these migrating boundaries is due to the presence of intergranular precipitates which triggers the nucleation of creep voids.