Steady-State Permeability Measurements on Intact Shale Samples at Reservoir Conditions - Effect of Stress, Temperature, Pressure, and Type of Gas
Authors:
- 10 March 2013
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Gas shales have gained significant attention in recent years as a source of natural gas, resulting in significant focus on storage and flow mechanisms in these rocks. The permeability of shale reservoirs is a key control that determines the producibility and profitability of the resource. In contrast to conventional reservoir rocks, gas shales have significant organic content and, often, most of the pores are in the organic matter. Furthermore, most pores are in the 1–100 nanometer size range, and gas can be stored in these pores as sorbed gas as well as free gas, which has raised concerns such as deviation of the flow mechanism from Darcy flow, and the effect of sorption on permeability in shales. The common industry practice of measuring permeability using crushed rock samples and helium as test gas at room conditions has been found to have a number of shortcomings, including inconsistent results reported by different laboratories using such methods. In this paper we present the results of steady-state permeability measurements on shale samples conducted at reservoir conditions, and demonstrate the effect of stress, pressure, temperature, sorption, and type of gas utilized for measuring permeability of intact shale samples. The results presented in this paper show that net stress, pore pressure, and temperature have strong effects on permeability of shales. Additionally, we show that the type of gas utilized for measurements, and sorption phenomenon can have a significant influence on the measured permeability, particularly for organic rich samples such as gas shales. We also demonstrate through examination of Klinkenberg flow model, that currently, with the exception of the effect of pressure on permeability, no existing model accurately predicts the effects of other factors such as temperature and type of gas on permeability of shale samples in the absence of actual experimental measurements. This paper documents that there may be significant errors associated with measurements that are conducted at room conditions using non-reservoir or non-sorbing gas, and accurate permeability measurements require tests to be conducted at conditions that are close to the in-situ conditions. Accurate permeability measurements conducted at reservoir conditions enable superior characterization, supporting sound business decisions in the development phase of a project, and more accurate production forecasting in the production phase.Keywords
This publication has 10 references indexed in Scilit:
- Influence of CO2 on New Albany Shale composition and pore structureInternational Journal of Coal Geology, 2013
- Understanding Permeability Measurements in Tight Shales Promotes Enhanced Determination of Reservoir Quality2012
- Gas Permeability of ShaleSPE Reservoir Evaluation & Engineering, 2012
- High-pressure adsorption of gases on shales: Measurements and modelingInternational Journal of Coal Geology, 2012
- Laboratory measurement and modeling of coal permeability with continued methane production: Part 1 – Laboratory resultsFuel, 2012
- Advances in Measurement Standards and Flow Properties Measurements for Tight Rocks such as Shales2012
- Interactions of multiple processes during CBM extraction: A critical reviewInternational Journal of Coal Geology, 2011
- From Oil-Prone Source Rock to Gas-Producing Shale Reservoir – Geologic and Petrophysical Characterization of Unconventional Shale-Gas Reservoirs2010
- Micro-Structural Studies of Gas Shales2010
- Matrix Permeability Measurement of Gas Productive Shales1993