Use of TiN(O)/Ti as an effective intermediate stress buffer and diffusion barrier for Cu/parylene-n interconnects
- 12 November 2001
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 79 (20) , 3260-3262
Abstract
Copper and parylene-n are studied for ultralarge scale integration circuits because of their low electrical resistivity, resistance to electromigration and low dielectric constant, chemical inertness, and compatibility with current integrated circuit manufacturing, respectively. Copper diffusion observed at and above 300 °C in correlates to an increase in the crystallinity of the α phase and subsequent transformation to the more open structure of β parylene. Titanium nitride (oxygen) [TiN(O)]/titanium (Ti) bilayers are successfully implemented as a diffusion barrier. TiN is proven to be a very good diffusion barrier up to 500 °C for copper due to its large negative heat of formation and hence its thermal stability. Incorporation of an intermediate titanium layer reduced the residual stress and thermal mismatch between and TiN. Without the Ti layer thermal cracking of TiN occurred. The presence of the buffer layer had no detrimental effects on the overall resistivity. The effectiveness of the barrier is attributed to stuffing of the grain boundaries with oxygen and nitrogen. This results in the elimination of rapid diffusion paths. This work provides the foundation for future implementation of for higher temperature microelectronics.
Keywords
This publication has 10 references indexed in Scilit:
- Thermal stability of nitride thin filmsVacuum, 2000
- Copper metallization for ULSL and beyondCritical Reviews in Solid State and Materials Sciences, 1995
- Thermal And Mechanical Properties Of Low K PolymersMRS Proceedings, 1995
- Structure and properties of titanium nitride thin films deposited at low temperatures using direct current magnetron sputteringJournal of Vacuum Science & Technology A, 1994
- Reduction in diffusion of copper in parylene by thermal pretreatmentJournal of Vacuum Science & Technology A, 1992
- Effects of oxygen in TiNx on the diffusion of Cu in Cu/TiN/Al and Cu/TiNx/Si structuresApplied Physics Letters, 1991
- Diffusion and self-gettering of ion-implanted copper in polyimideJournal of Applied Physics, 1989
- Influence of surface coatings on elasticity, residual stresses, and fracture properties of silicon microelementsJournal of Applied Physics, 1989
- Diffusion barriers in thin filmsThin Solid Films, 1978
- Crystallography of Poly-p-XylyleneJournal of Applied Physics, 1966