Corrosion Behavior of 18-8 Stainless Steels in Hot Concentrated Caustic Soda Solutions under Heat-Transfer Conditions
Authors:
- M. YasudaMYM. Yasuda
- S. TokunagaSTS. Tokunaga
- T. TagaTTT. Taga
- 1 December 1985
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 41 (12) , 720-727
Abstract
The corrosion behavior of AISI 304 and 316 stainless steels (SSs) in hot concentrated caustic soda solutions was investigated under heat-transfer conditions. The corrosion potential of the specimens was located in the active region; thus, the alloys were attacked in the form of general corrosion, depending on the heat-transfer conditions. AISI 316 was more susceptible than AISI 304. Such corrosion behavior is attributed to the failure of the passive film on the heated surface, caused by concentration of caustic solution next to the metal surface and erosion by gas bubbles. A molybdenum-free alloy, AISI 305J1, was tested under the same conditions as AISI 316 to clarify the detrimental effect of Mo on austenitic SS corrosion in hot concentrated NaOH. Intergranular corrosion was occasionally found when the potential was located in the passive region, depending on test conditions and heat treatment of the specimens.Keywords
This publication has 11 references indexed in Scilit:
- Corrosion of Carbon Steel in Hot NaOH Solutions Under Heat Transfer ConditionsCorrosion, 1982
- Inhibitive Effect of Oxyanions on the Stress Corrosion Cracking of Type 304 Stainless Steel in Boiling 20N NaOH SolutionCorrosion, 1979
- Stress Corrosion Cracking and Anodic Behavior of AISI 304 Stainless Steel, Inconel 600, and Incoloy 800 Straining in Boiling NaOH SolutionsCorrosion, 1978
- Caustic Stress Corrosion of Fe-Cr-Ni Austenitic AlloysCorrosion, 1977
- Stress Corrosion Behavior of Fe-Cr-Ni and Other Alloys in High Temperature Caustic SolutionsCorrosion, 1977
- Stress Corrosion Cracking of Stainless Steel and Nickel Alloys at Controlled Potentials in 10% Caustic Soda Solutions at 550°FJournal of the Electrochemical Society, 1976
- The Influence of Specimen Type and Heat Treatment on the Caustic Stress Corrosion Cracking of Some Stainless AlloysCorrosion, 1976
- Effect of Alloy Structure, Hydroxide Concentration, and Temperature on the Caustic Stress Corrosion Cracking of Austenitic Stainless SteelsCorrosion, 1974
- Chemistry of Grain Boundaries and Its Relation to Intergranular Corrosion of Austenitic Stainless SteelCorrosion, 1972
- The Effect of Sigma Phase vs Chromium Carbides On The Intergranular Corrosion Of Type 316 and 316L Stainless Steel: Part 1—A Survey of the LiteratureCorrosion, 1959