Cutting Force Estimation from Feed Drive Current via Inverse Filtering
Open Access
Abstract
This paper presents a virtual sensor for the in-process prediction of cutting forces from feed drive current measurements in milling processes via inverse filtering. Components of the feed drive current in ball-screw drives that are related to inertia, friction, and gravity are separated from the cutting-force-related component via models or air-cutting experiments. Impact hammer tests are then used to identify the transfer function between forces at the tool tip and the corresponding response at the feed drive. The proposed inverse filtering approach completes the virtual sensor for online monitoring of cutting forces based on feed drive current signals. Compared to existing approaches, which are mainly based on Kalman-filter or deep learning models, this method avoids the additional effort for modeling, parameter identification and generation of training data. Experimental results are presented for cutting tests on a three-axis turn-milling center. The prediction error between the virtual sensor and the measured cutting forces lies between 6% and 17%, depending on the cutting parameters. In general, the virtual sensor can be implemented in any feed drive system with a minimal effort for parameter identification.Keywords
Funding Information
- Federal Ministry for Economic Affairs and Energy (20L2105B1)
This publication has 25 references indexed in Scilit:
- A physics-guided data driven method for sensorless measurement of cutting forces using CNC servo drive signalsCIRP Annals, 2026
- Digital twins for cutting processesCIRP Annals, 2023
- Wide-bandwidth cutting force monitoring via motor current and accelerometer signalsCIRP Annals, 2023
- Enhancing the multi-encoder-based cutting force estimation along the stationary axis of a machine tool with multiple inertia dynamicsThe International Journal of Advanced Manufacturing Technology, 2022
- Process monitoring of machiningCIRP Annals, 2022
- Real-time estimation of cutting forces via physics-inspired data-driven modelCIRP Annals, 2022
- Monitoring of vibrations and cutting forces with spindle mounted vibration sensorsCIRP Annals, 2019
- Mode decoupled and sensorless cutting force monitoring based on multi-encoderThe International Journal of Advanced Manufacturing Technology, 2017
- Sensorless automated condition monitoring for the control of the predictive maintenance of machine toolsCIRP Annals, 2009
- Real-Time Prediction of Workpiece Errors for a CNC Turning Centre, Part 3. Cutting Force Estimation Using Current SensorsThe International Journal of Advanced Manufacturing Technology, 2001