Investigation on corner stall prediction and flow control by blended blade and end wall technology in a compressor cascade based on modified Spalart–Allmaras model
- 1 November 2022
- journal article
- conference paper
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (11)
Abstract
Corner stall has a significant impact on the performance of compressor cascades, but it is difficult to predict precisely using conventional Reynolds-averaged Navier–Stokes models. In view of this, first, the Spalart–Allmaras (SA) turbulence model modified with helicity is recalibrated to predict corner stall accurately. The internal reasons why the modified SA model does not overestimate the extent and intensity of corner stall as the original SA model is further explored through the analysis of turbulence transport nature. The investigation of corner stall control in a modified National Advisory Committee for Aeronautics 65 cascade by the blended blade and end wall (BBEW) technology is then carried out using the recalibrated MSA model. The numerical results indicate that the BBEW technology can eliminate the separation vortex on the end wall and change the flow field from corner stall to corner separation. The best BBEW scheme reduces the total pressure loss coefficient by 14.13%. The BBEW technology can most significantly enhance the aerodynamic performance of the compressor cascade when the maximum BBEW thickness is close to the trailing edge. When the maximum BBEW thickness is in the same position, the control effect rises first and subsequently falls as the maximum BBEW thickness grows. These research results serve as a guide for choosing turbulence models and designing the BBEW schemes.Keywords
Funding Information
- National Natural Science Foundation of China (51976010)
- National Natural Science Foundation of China (12002331)
- National Major Science and Technology Projects of China (2017-II-0006-0020)
- National Major Science and Technology Projects of China (J2019-II-0003-0023)
- National Major Science and Technology Projects of China (2017-II-0001-0013)
This publication has 24 references indexed in Scilit:
- Modification of Spalart-Allmaras Turbulence Model for Predicting S825 Airfoil Aerodynamic PerformanceApplied Mechanics and Materials, 2014
- Modification of Spalart–Allmaras model with consideration of turbulence energy backscatter using velocity helicityPhysics Letters A, 2011
- An aerodynamic design and numerical investigation of transonic centrifugal compressor stageJournal of Thermal Science, 2011
- Assessment Study of K-ɛ Turbulence Models and Near-Wall Modeling for Steady State Swirling Flow Analysis in Draft Tube UsingFluentEngineering Applications of Computational Fluid Mechanics, 2011
- A Criterion for Axial Compressor Hub-Corner StallJournal of Turbomachinery, 2008
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- Local Structure Of Turbulence in an Incompressible Viscous Fluid at Very Large Reynolds Numbers1991
- Stochastic backscatter in a subgrid-scale model: Plane shear mixing layerPhysics of Fluids A: Fluid Dynamics, 1990
- Reynolds-stress and dissipation-rate budgets in a turbulent channel flowJournal of Fluid Mechanics, 1988
- The Aerodynamic Significance of Fillet Geometry in Turbocompressor Blade RowsJournal of Engineering for Power, 1980