Self-calibration for kinematic parameters of a redundant planar two-degree-of-freedom parallel manipulator using evolutionary algorithms
Authors:
- 30 March 2009
- journal article
- research article
- Published by Taylor & Francis in Engineering Optimization
- Vol. 41 (4) , 385-398
Abstract
In this article, the self-calibration problem of a planar two-degree-of-freedom (2-DoF) parallel manipulator with a redundant joint sensor is studied. By eliminating the passive joint positions, a new error function is proposed. Furthermore, by decoupling the kinematic parameters of the error function, the minimization process is simplified. In order to obtain the global optimum, three evolutionary algorithms including genetic algorithm, particle swarm optimization, and differential evolution are applied to minimize the error function. In the application, the performances and effectiveness of the applied algorithms on this specific problem are compared under three different error functions, and the results show that the differential-evolution method under the decoupled error function produces the best result. Finally, actual calibration is carried out based on differential evolution under the decoupled error function, and the result demonstrates that all of the 12 parameters of the manipulator are calibrated with high accuracy.Keywords
This publication has 17 references indexed in Scilit:
- Auto-calibration of a redundant parallel manipulator based on the projected tracking errorArchive of Applied Mechanics, 2007
- Self-Adapting Control Parameters in Differential Evolution: A Comparative Study on Numerical Benchmark ProblemsIEEE Transactions on Evolutionary Computation, 2006
- Locating and tracking multiple dynamic optima by a particle swarm model using speciationIEEE Transactions on Evolutionary Computation, 2006
- Simplifying the kinematic calibration of parallel mechanisms using vision-based metrologyIEEE Transactions on Robotics, 2006
- A Cooperative Approach to Particle Swarm OptimizationIEEE Transactions on Evolutionary Computation, 2004
- Kinematic Calibration for Redundantly Actuated Parallel MechanismsJournal of Mechanical Design, 2004
- Kinematics and workspace analysis of a parallel wire mechanism for measuring a robot poseMechanism and Machine Theory, 1999
- No free lunch theorems for optimizationIEEE Transactions on Evolutionary Computation, 1997
- The Calibration Index and Taxonomy for Robot Kinematic Calibration MethodsThe International Journal of Robotics Research, 1996
- A Laser Tracking System to Measure Position and Orientation of Robot End Effectors Under MotionThe International Journal of Robotics Research, 1994