Long term aging of various duplex stainless steels between 250 °C and 400 °C – relationship between toughness measurements and metallurgical parameters
Authors:
- N. MeyerNMN. Meyer
- M. MantelMMM. Mantel
- A. GauthierAGA. Gauthier
- C. BourginCBC. Bourgin
- 1 December 2011
- journal article
- Published by EDP Sciences in Revue de Métallurgie
- Vol. 108 (4) , 213-223
Abstract
Embrittlement of duplex stainless steels after aging below 500 , are also known to participate to embrittlement, making the composition dependence of embrittlement kinetics even more intricate. In this study, long term aging treatments, up to 2 years at intermediate temperature (250C), have been performed for various duplex stainless steels grades containing different alloying contents in Cr, Mo, Si, Ni and N. Impact toughness has been measured after each aging condition, and an apparent activation energy could be deduced for the various grades. This quantity is a good indicator of embrittlement resistance. Fine microstructural characterizations have been performed in the ferrite: composition before aging was determined by EPMA, and precipitation state before and after aging was observed on TEM. The influence of alloying elements on the embrittlement phenomenon is analyzed on the basis of these results and of driving force calculations performed on Thermo-Calc®.Keywords
This publication has 10 references indexed in Scilit:
- Effect of 475°C embrittlement on the mechanical properties of duplex stainless steelMaterials Science and Engineering: A, 2009
- On the effect of nickel substitution in duplex stainless steelMaterials Science and Technology, 2008
- Corrosion resistance evaluation of the UNS S31803 duplex stainless steels aged at low temperatures (350 to 550°C) using DLEPR testsJournal of Materials Science, 2005
- Comparison of the rate of decomposition in Fe45%Cr, Fe45%Cr5%Ni and duplex stainless steelsApplied Surface Science, 1996
- Embrittlement and aging at 475 °C in an experimental ferritic stainless steel containing 38 wt.% chromiumMaterials Science and Engineering: A, 1995
- Atom probe and transmission electron microscopy study of aging of cast duplex stainless steelsMaterials Science and Technology, 1990
- Relationship between evolution of mechanical properties of various cast duplex stainless steels and metallurgical and aging parameters: outline of current EDF programmesMaterials Science and Technology, 1990
- Aging kinetics of CF3 cast stainless steel in temperature range 300–400°CMaterials Science and Technology, 1990
- Ageing characteristics of a duplex stainless steelJournal of Materials Science Letters, 1988
- Influence of Long-Time Aging of CF8 and CF8M Cast Steel at Temperatures Between 300 and 500°C on Impact Toughness and Structural Properties1982