A sustainable system for decontamination of cephalexin antibiotic using electrocoagulation technology and response surface methodology
Authors:
- 6 August 2023
- journal article
- research article
- Published by Wiley in Remediation Journal
- Vol. 33 (4) , 365-378
Abstract
The emergence of synthetic micropollutants in wastewater due to domestic and industrial use has presented new challenges for treatment processes. Among these pollutants, pharmaceutical and personal care products (PPCPs) are considered emerging contaminants due to their potential to enter drinking water sources. Antibiotics, in particular, are of significant concern due to their high consumption in veterinary and human applications. In this study, the electrocoagulation (EC) process is used as an efficient technique for the removal of cephalexin (CFX) from pharmaceutical wastewater. The study aims to explore the ability of the EC process to remove CFX and optimize its performance using the response surface method based on Central Composite Design (RSM‐CCD). The effects of initial CFX concentration, electrolysis time, initial pH, and electrode type (non‐insulated and insulated) were considered in the optimization process. This research is distinct as it examines the influence of key factors on the elimination of CFX. The results showed that electrolysis time had the most significant effect on CFX removal using the EC process. The analysis of variance (ANOVA) test was used to evaluate the importance of independent variables and their interaction. The optimal operating conditions for maximum removal efficiency (86.53%) were an initial CFX concentration, reaction time, and initial pH of 34 mg/L, 34.35 min, and 6.5, respectively, using an insulated electrode. Under these optimal conditions, predicted CFX removal was 93.54%. These findings demonstrate that RSM‐CCD is a useful tool for optimizing electrochemical removal processes for micropollutants such as CFX from wastewater streams. The study highlights the importance of considering electrode type in optimizing EC processes for micropollutant removal from wastewater.Keywords
This publication has 24 references indexed in Scilit:
- Experimental data of electric coagulation and photo-electro-phenton process efficiency in the removal of metronidazole antibiotic from aqueous solutionData in Brief, 2018
- Removal of ciprofloxacin from hospital wastewater using electrocoagulation technique by aluminum electrode: Optimization and modelling through response surface methodologyProcess Safety and Environmental Protection, 2017
- Synergistic effect of dual process (photocatalysis and photo-Fenton) for the degradation of Cephalexin using TiO2 immobilized novel clay beads with waste fly ash/foundry sandJournal of Photochemistry and Photobiology A: Chemistry, 2017
- Enhanced efficiency in HA removal by electrocoagulation through optimizing flocs properties: Role of current density and pHSeparation and Purification Technology, 2017
- Adsorption of cephalexin from aqueous solution using natural zeolite and zeolite coated with manganese oxide nanoparticlesJournal of Molecular Liquids, 2015
- Risk assessment of antibiotic residues in different water matrices in India: key issues and challengesEnvironmental Science and Pollution Research, 2014
- Removal of tetracycline by electrocoagulation: Kinetic and isotherm modeling through adsorptionJournal of Environmental Chemical Engineering, 2014
- Primary potential and current density distribution analysis: A first approach for designing electrocoagulation reactorsChemical Engineering Journal, 2012
- The effect of stirring speed and current density on removal efficiency of poultry slaughterhouse wastewater by electrocoagulation methodDesalination, 2011
- Historical use and future development of chemicals for solid–liquid separation in the mineral processing industryMinerals Engineering, 2003