Process conditions of gas production in the electrochemical treatment of fracturing flowback fluid process based on support vector machine method
- 5 July 2020
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 11122-11132
Abstract
Gas production during the electrochemical treatment of waste liquids has potential safety risks. Herein, hydrogen (H2) production in such treatment was taken as the control target. Electrode combinations with relatively low H2 production were selected for electrochemical treatment during a fracturing flowback fluid experiment, in which mesh-like titanium–based ordinary ruthenium–iridium–palladium-coated electrode was the anode and plate–like titanium–based ordinary ruthenium–iridium–palladium-coated electrode was the cathode. The effects of electrolysis time (t), electrolytic current (I), electrode spacing (D), and other factors on H2 production in the electrolytic process were investigated. On the basis of the experimental data, a model was established using the support vector machine (SVM) method. Firstly, the three parameters of the radial basis function kernel of the model were simultaneously optimized using the quantum–particle swarm optimization algorithm as follows: penalty parameter = 256, kernel parameter = 0.0097039, and loss parameter = 0.014928. Then, an SVM regression model was established according to the three optimal parameters. The correlation coefficient was 0.98291 (r = 0.9914), and the mean–square error was 1.1883. The regression model was used to predict the technological conditions (t, I, and D) for the maximum/minimum H2 production in the electrochemical treatment of fracturing flowback fluid. The values were t = 50 min, I = 1.5 A, and D = 2.0 cm for the maximum H2 production, and t = 30 min, I = 0.5 A, and D = 6.0 cm for the minimum H2 production. Under these process conditions, the predicted maximum/minimum H2 production volumes were 145.04 and 20.47 mL, respectively.Keywords
This publication has 8 references indexed in Scilit:
- Fault diagnosis method of photovoltaic array based on support vector machineEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2019
- Assessment of gas production and electrochemical factors for fracturing flow-back fluid treatment in Guangyuan oilfieldEnvironmental Engineering Research, 2018
- A Review On Hydrogen Energy Production From Electrochemical System: Benefits And ChallengesEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2018
- Using response surface methodology to evaluate electrocoagulation in the pretreatment of produced water from polymer-flooding well of Dagang Oilfield with bipolar aluminum electrodesDesalination and Water Treatment, 2016
- The Density Fraction Estimation of Coarse Coal by Use of the Kernel Method and Machine VisionEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2014
- Indirect Electrocatalytic Degradation of Cyanide at Nitrogen-Doped Carbon Nanotube ElectrodesEnvironmental Science & Technology, 2011
- Electrochemical generation of the Fenton's reagent: application to atrazine degradationWater Research, 2002
- The Nature of Statistical Learning Theory1995