Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements
Authors:
Open Access
- 13 April 2017
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (8) , 9443-9448
Abstract
We experimentally demonstrate transverse load and strain sensing based on a fiber optic Fabry-Perot interferometer (FPI) with special air cavity, which was created by fusion splicing single mode fiber (SMF), hollow core fiber (HCF) and several electrical arc discharges. The cavity height of this structure is higher than the cladding diameter of SMF so that it can sense transverse load with high sensitivity. The transverse load sensitivity of this air cavity FPI sensor is 1.31 nm∕N and about 5 times more sensitive compared to the current fiber tip interferometer (0.2526 nm∕N). Meanwhile, this sensor also can measure strain and the strain sensitivity of 3.29 pm∕με is achieved. In addition, the low temperature sensitivity (1.08 pm/°C) of the sensor can reduce the temperature-induced measurement error. This novel air cavity FPI can be developed and used as high-sensitivity transverse load and strain sensor with temperature-insensitive.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (MOST) (2012BAF14B11)
- National Natural Science Foundation of China (NSFC) (61078006, 61275066)
This publication has 19 references indexed in Scilit:
- Simultaneous measurement of temperature and refractive index using focused ion beam milled Fabry-Perot cavities in optical fiber micro-tipsOptics Express, 2016
- Hybrid structured fiber-optic Fabry–Perot interferometer for simultaneous measurement of strain and temperatureOptics Letters, 2014
- In-line open-cavity Fabry–Pérot interferometer formed by C-shaped fiber fortemperature-insensitive refractive index sensingOptics Express, 2014
- High-sensitivity strain sensor based on in-fiber improved Fabry–Perot interferometerOptics Letters, 2014
- Microfluidic refractive index sensor based on an all-silica in-line Fabry–Perot interferometer fabricated with microstructured fibersOptics Express, 2013
- Optical fiber Fabry-Perot interferometer cavity fabricated by femtosecond laser micromachining and fusion splicing for refractive index sensingOptics Express, 2012
- Towards the control of highly sensitive Fabry-Pérot strain sensor based on hollow-core ring photonic crystal fiberOptics Express, 2012
- Hollow-core photonic crystal fiber Fabry–Perot sensor for magnetic field measurement based on magnetic fluidOptics & Laser Technology, 2012
- Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensingOptics Express, 2012
- Miniature fiber-optic high temperature sensor based on a hybrid structured Fabry–Perot interferometerOptics Letters, 2008