Concrete lintels reinforced with steel fibres oriented by a magnetic field
Authors:
Open Access
- 31 October 2022
- journal article
- research article
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica
- Vol. 62 (5) , 531-537
Abstract
This paper explores the possibility of applying the technique of magnetic orientation of steel fibres for manufacturing a concrete structural element of realistic dimensions, compared to small laboratory specimens. This technique could be a part of an answer to the current need for faster and automated production in the prefabrication industry. The examined specimens have dimensions of commonly used lintels in construction, 80 mm × 100 mm × 980 mm. The properties of specimens with magnetically oriented fibres are compared with same size specimens prefabricated conventionally. The orientation of fibres has been confirmed by Q-factor non-destructive testing method using a measuring coil. All specimens were tested with a four-point bending test. The specimens with oriented fibres show a significantly higher flexural strength, by 150 %, than specimens produced conventionally with the same volume of fibres.Keywords
This publication has 12 references indexed in Scilit:
- Mechanical Properties of High-Performance Concrete with Steel Fibers Oriented by an Electromagnetic FieldJournal of Materials in Civil Engineering, 2022
- Quality factor as a tool to measure concentration and orientation of ferromagnetic fibres in sampleMaterials Today: Proceedings, 2022
- Magnetic properties of steel fibres commonly used in concreteMaterials Today: Proceedings, 2022
- Rheological properties of sonogel and comparison with rheological properties of high-performance concreteMaterials Today: Proceedings, 2022
- The influence of steel fibres on compressive and tensile strength of ultra high performance concrete: A reviewConstruction and Building Materials, 2020
- Investigation of engineering properties of steel fiber reinforced concrete exposed to homogeneous magnetic fieldConstruction and Building Materials, 2020
- Alignment of hooked-end fibres in matrices with similar rheological behaviour to cementitious composites through homogeneous magnetic fieldsConstruction and Building Materials, 2018
- Magnetic orientation of steel fibres in self-compacting concrete beams: Effect on failure behaviourCement and Concrete Composites, 2017
- Aligning steel fibers in cement mortar using electro-magnetic fieldConstruction and Building Materials, 2017
- Numerical modelling of calcination reaction mechanism for cement productionChemical Engineering Science, 2012