Vibrational Response of Initially Deformed Bistable Microbeams Under the Combined Effect of Mechanical Shock Loads and Electrostatic Forces
- 27 October 2017
- journal article
- research article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 140 (2)
Abstract
This paper focuses on the influence of sudden drop tests on the nonlinear structural behavior of electrically actuated bi-table shallow microelectromechanical system (MEMS) arches. The assumed structure consists of an initially bell-shaped doubly clamped microbeam with a rectangular cross section. The Euler–Bernoulli beam theory is assumed to model the nonlinear structural behavior of the bistable system under the combined effect of both the direct current (DC) actuating load and the shaking waves. Moreover, the structural model takes into account both geometric midplane stretching and electric actuation nonlinear terms. A multimode Galerkin-based decomposition is used to discretize the beam equations to extract a reduced-order model (ROM). The convergence of the ROM simulations are first verified and furthermore compared to published experimental data. A thorough ROM parametric study showed that the effect of increasing the shallow arch initial rise alter drastically the system behavior from undergoing a uninterrupted snap-through motion to a sudden snap-through instability. Moreover, the arch rise relationship with its shock spectrum response (SSR) is investigated and it was concluded that as increasing the rise value can cause the system to collapse under the combined DC and shock wave loadings if the shock wave duration is lower or near the system fundamental natural period. All the presented graphs in this investigation represent some robust numerical approaches and design tools to help MEMS designers in improving both the reliability and efficiency of these bistable-based microdevices under shaking dynamic environments.Keywords
Funding Information
- King Fahd University of Petroleum and Minerals (SB151005)
This publication has 37 references indexed in Scilit:
- MEMS-based inertial system for railway track diagnosticsGyroscopy and Navigation, 2011
- The dynamic behavior of MEMS arch resonators actuated electricallyInternational Journal of Non-Linear Mechanics, 2010
- Polysilicon MEMS accelerometers exposed to shocks: numerical–experimental investigationJournal of Micromechanics and Microengineering, 2009
- A substrate energy dissipation mechanism in in-phase and anti-phase micromachinedz-axis vibratory gyroscopesJournal of Micromechanics and Microengineering, 2008
- Input and Design Optimization Under Uncertainty to Minimize the Impact Velocity of an Electrostatically Actuated MEMS SwitchJournal of Vibration and Acoustics, 2008
- Numerical evaluation of high-order modes of vibration in uniform Euler–Bernoulli beamsJournal of Sound and Vibration, 2007
- Design, Simulation, and Fabrication of a Quadstable Monolithic Mechanism With X- and Y-Directional Bistable Curved BeamsJournal of Mechanical Design, 2006
- Resonant non-linear normal modes. Part II: activation/orthogonality conditions for shallow structural systemsInternational Journal of Non-Linear Mechanics, 2003
- Using Shock Response Spectra to Design Motion Control Profiles for Flexible StructuresJournal of Vibration and Control, 2001
- Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theoryJournal of Microelectromechanical Systems, 1993