Structural Analysis of Electrochemical Hydrogen Compressor End-Plates for High-Pressure Applications
Open Access
Abstract
Transportation and portable applications already use hydrogen as fuel, but it is essential to use highly-efficient hydrogen storage methods to increase its usage in the future. The compressed form is the most utilized for transportation applications, but mechanical compressors have low efficiency when compressing low quantities of gas to high pressure. The most suitable device for hydrogen compression is the Electrochemical Hydrogen Compressor (EHC). It has the same structure as a Proton Exchange Membrane Fuel Cell (PEM-FC), but it works at very high-pressure ( 700 ). The present work analyses the monopolar plate of an Electrochemical Hydrogen Compressor prone to hydrogen embrittlement. Irregular shape variations generate peaks of stress magnitude and triaxiality, further contributing to decreasing metal ductility at the local scale. The calculation of the stress field in such components is essential due to the possibility of failure due to the material embrittlement caused by hydrogen. The paper presents a conceptual design of an EHC operating at 700 and focuses on the shape and the mechanical stress of the end-plates to have conservative levels of the nominal stress states, which then are taken as the design parameter for providing adequate structural integrity and mechanical reliability to the component. The FEM analysis with Marc software—of MSC Software Corporation—identified the optimal end-plates configuration in circular plan view and active area. The plate, sized to have a deflection no greater than when the EHC works at 700 , should have the minimum thickness of 17 .
Keywords
This publication has 23 references indexed in Scilit:
- On-board and Off-board performance of hydrogen storage options for light-duty vehiclesInternational Journal of Hydrogen Energy, 2012
- Hydrogen Embrittlement Properties of Stainless and Low Alloy Steels in High Pressure Gaseous Hydrogen EnvironmentISIJ International, 2012
- Description and characterization of an electrochemical hydrogen compressor/concentrator based on solid polymer electrolyte technologyInternational Journal of Hydrogen Energy, 2011
- Technical assessment of compressed hydrogen storage tank systems for automotive applicationsInternational Journal of Hydrogen Energy, 2011
- Hydrogen quality from decarbonized fossil fuels to fuel cellsInternational Journal of Hydrogen Energy, 2009
- Some fundamental aspects in electrochemical hydrogen purification/compressionJournal of Power Sources, 2008
- Role of stress triaxiality in elastoplastic characterization and ductile failure predictionEngineering Fracture Mechanics, 2007
- Recent Advances in Hydrogen Storage in Metal‐Containing Inorganic Nanostructures and Related MaterialsAdvanced Materials, 2004
- The compression of hydrogen in an electrochemical cell based on a PE fuel cell designJournal of Power Sources, 2002
- Electrochemical hydrogen compressorElectrochimica Acta, 1998