Numerical Investigation of Transient Flow in a Prototype Centrifugal Pump during Startup Period
Authors:
- Yu-Liang ZhangYZYu-Liang Zhang
- Zu-Chao ZhuZZZu-Chao Zhu
- Hua-Shu DouHDHua-Shu Dou
- Bao-Ling CuiBCBao-Ling Cui
- Yi LiYLYi Li
- Zhao-Zhong ZhouZZZhao-Zhong Zhou
- 1 January 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Turbo & Jet-Engines
- Vol. 34 (2)
Abstract
Transient performance of pumps during transient operating periods, such as startup and stopping, has drawn more and more attentions recently due to the growing engineering needs. During the startup period of a pump, the performance parameters such as the flow rate and head would vary significantly in a broad range. Therefore, it is very difficult to accurately specify the unsteady boundary conditions for a pump alone to solve the transient flow in the absence of experimental results. The closed-loop pipe system including a centrifugal pump is built to accomplish the self-coupling calculation. The three-dimensional unsteady incompressible viscous flow inside the passage of the pump during startup period is numerically simulated using the dynamic mesh method. Simulation results show that there are tiny fluctuations in the flow rate even under stable operating conditions and this can be attributed to influence of the rotor–stator interaction. At the very beginning of the startup, the rising speed of the flow rate is lower than that of the rotational speed. It is also found that it is not suitable to predict the transient performance of pumps using the calculation method of quasi-steady flow, especially at the earlier period of the startup.Keywords
This publication has 14 references indexed in Scilit:
- Computational analysis of centrifugal pump delivering solid-liquid two-phase flow during startup periodChinese Journal of Mechanical Engineering, 2014
- Experimental Study of a Cavitating Centrifugal Pump During Fast StartupsJournal of Fluids Engineering, 2010
- Transient Behavior of Turbomachineries: Applications to Radial Flow Pump StartupsJournal of Fluids Engineering, 2007
- Numerical Study of Pressure Fluctuations Caused by Impeller-Diffuser Interaction in a Diffuser Pump StageJournal of Fluids Engineering, 2001
- Transient Behavior of a Cavitating Centrifugal Pump at Rapid Change in Operating Conditions—Part 3: Classifications of Transient PhenomenaJournal of Fluids Engineering, 1999
- Transient Behavior of a Cavitating Centrifugal Pump at Rapid Change in Operating Conditions—Part 2: Transient Phenomena at Pump Startup/ShutdownJournal of Fluids Engineering, 1999
- Transient Behavior of a Cavitating Centrifugal Pump at Rapid Change in Operating Conditions—Part 1: Transient Phenomena at Opening/Closure of Discharge ValveJournal of Fluids Engineering, 1999
- The Response of a Centrifugal Pump to Fluctuating Rotational SpeedJournal of Fluids Engineering, 1995
- Centrifugal pump transient characteristics and analysis using the method of characteristicsInternational Journal of Mechanical Sciences, 1995
- Transient Characteristics of a Centrifugal Pump During Stopping PeriodJournal of Fluids Engineering, 1986