Modifying alkali-activated materials with reactive MgO: A comprehensive overview of mechanisms and performance
- 26 March 2026
- journal article
- review article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (13) , 5865-5899
Abstract
Alkali-activated materials (AAMs) are promising low-carbon alternatives to Portland cement, but their wider application is limited by poor volumetric stability, high shrinkage, and slow reaction kinetics, particularly in near-neutral salt-activated systems. Reactive magnesium oxide (MgO) has emerged as a multifunctional component that can address these limitations by acting as a partial precursor replacement, a composite activator, or a primary activator. This review provides a comprehensive overview of MgO’s role in AAMs, focusing on hydration mechanisms, fresh properties, mechanical performance, volumetric stability, and durability. MgO influences AAM behavior through several mechanisms. Its hydration produces expansive brucite, which compensates for shrinkage, while in near-neutral systems MgO increases pore solution alkalinity, accelerating precursor dissolution and reaction kinetics. The formation of secondary phases, such as hydrotalcite-like compounds and hydrated magnesium carbonates, further refines pore structure, enhances durability, and contributes to self-healing. The impact of MgO is highly system-dependent. MgO generally reduces workability and accelerates setting, but significantly mitigates autogenous and drying shrinkage. Optimal dosages vary with activator type: approximately 4–7.5% is effective in sodium silicate-activated slag, whereas higher dosages (~ 5–10%) are typically required in Na2CO3-activated systems. Strength development is non-monotonic and activator-specific, with moderate dosages enhancing strength in Na2CO3-activated systems but potentially reducing strength in NaOH-activated slag due to excessive expansion. When optimally dosed, MgO improves durability by enhancing chloride binding and carbonation resistance. Overall, MgO performance depends on its reactivity, particle size, activator chemistry, and precursor composition. This review synthesizes these interactions to guide the design of durable, high-performance, and sustainable AAM binders.Keywords
This publication has 35 references indexed in Scilit:
- Early hydration and microstructure formation of ultra-rapid hardening alkali-activated slag cement (URHA) at presence of MgOCement and Concrete Composites, 2025
- The influence of Al2O3, CaO, MgO and TiO2 content on the early-age reactivity of GGBS in blended cements, alkali-activated materials and supersulfated cementsCement and Concrete Research, 2024
- Metakaolin Effect on Geopolymers’ Properties2024
- Durability of geopolymer cutoff wall backfill incorporating reactive MgO particles under dry-wet cyclesCement and Concrete Composites, 2023
- Silica Fume in Geopolymers2023
- The role of CaO and MgO incorporation in chloride resistance of sodium carbonate-activated slagCement and Concrete Composites, 2022
- Influence of metakaolin and limestone on chloride binding of slag activated by mixed magnesium oxide and sodium hydroxideCement and Concrete Composites, 2022
- Accelerating the reaction kinetics and improving the performance of Na2CO3-activated GGBS mixesCement and Concrete Research, 2019
- Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag pasteCement and Concrete Composites, 2015
- Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag — Part I: Effect of MgOCement and Concrete Research, 2011