Feasibility of producing two‐stage (preplaced aggregate) concrete by gravity process
Authors:
- 6 December 2019
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 21 (3) , 1157-1163
Abstract
Two‐stage concrete or Preplaced aggregate concrete (“PAC”) is produced by first preplacing the coarse aggregates into the formwork and then injecting a grout to fill in the voids between the aggregates. The involvement of unique and complex machinery for injecting grout has resulted in underutilization of PAC despite its high potential. This study aims to investigate the feasibility of producing PAC using simple construction technique.A suitable grout mix with a desired flowability and strength was applied via gravity process and pumping process to produce PAC using four different sizes of coarse aggregates that is, 45 mm, 37 mm, 20 mm and 14 mm. 20 mm coarse aggregate size was found to be the optimum size for the production of PAC by both gravity process and pumping process displaying compatible performance. Pumping process is recommended for aggregates smaller than 20 mm as it ensures better penetrability of the grout through the aggregates. PAC displays better dimensional stability with drying shrinkage less than half of that produced by conventional concrete.Keywords
Funding Information
- Hong Kong Polytechnic University
This publication has 7 references indexed in Scilit:
- Two-Stage Concrete as a Sustainable ProductionMATEC Web of Conferences, 2018
- Critical overview of two-stage concrete: Properties and applicationsConstruction and Building Materials, 2014
- Effect of grout proportions on strength of two-stage concreteStructural Concrete, 2008
- Effect of admixtures on fresh grout and two-stage (pre-placed aggregate) concreteStructural Concrete, 2007
- Influence of grout proportions on modulus of elasticity of two-stage concreteMagazine of Concrete Research, 2002
- Effect of the quantity of sand on the compressive strength of two-stage concreteMagazine of Concrete Research, 1996
- Failure Mechanism of Prepacked ConcreteJournal of Structural Engineering, 1988