Microstructure and corrosion resistance of bone‐implanted Mg–Zn–Ca–Sr alloy under different cooling methods
- 24 February 2020
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 40 (3) , 643-650
Abstract
The cooling gradient of Mg–3Zn–1Ca–0.5Sr alloy in cast ingots under different cooling methods (air cooling, warm‐water cooling and ice–water‐mixture cooling) was examined and the effect of cooling rate on the structure and corrosion properties was studied. The microstructure of the alloy was composed of α‐Mg, Ca 2 Mg 6 Zn 3 and Mg 17 Sr 2 phases. As the solidification cooling rate increased, the grain was refined, Zn and Sr were less segregated, the distributions of Zn and Sr were more uniform, and corrosion rate was found to first increase and then decrease; this contradicts the findings of recent research. With cooling rate increasing, the number of corroded microcouples comprising second phase and α‐Mg increases. More α‐Mg participates in corrosion, leading to a layered and deep corrosion pit and an increased corrosion rate. However, as the microstructure became sufficiently dense, the corroded structure protected the deep α‐Mg from participating in corrosion, thus reducing the corrosion rate.Keywords
This publication has 28 references indexed in Scilit:
- Biocompatibility Assessment of Novel Bioresorbable Alloys Mg-Zn-Se and Mg-Zn-Cu for Endovascular Applications: In Vitro StudiesJournal of Biomimetics, Biomaterials and Tissue Engineering, 2013
- Effects of Ca on microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Ca alloysJournal of Materials Science: Materials in Medicine, 2013
- Biocompatibility and strength retention of biodegradable Mg‐Ca‐Zn alloy bone implantsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2012
- Multimodal Microstructure Evolution in Wrought Mg-Zn-Y Alloys with High Strength and Increased DuctilityMaterials Science Forum, 2010
- Critical assessment and thermodynamic modeling of the binary Mg–Zn, Ca–Zn and ternary Mg–Ca–Zn systemsIntermetallics, 2009
- Corrosion characterization of Mg–8Li alloy in NaCl solutionCorrosion Science, 2009
- Sr-substituted hydroxyapatites for osteoporotic bone replacementActa Biomaterialia, 2007
- The microstructure, tensile properties, and creep behavior of as-cast Mg–(1–10)%Sn alloysJournal of Alloys and Compounds, 2007
- Stress Corrosion Cracking and Hydrogen Diffusion in MagnesiumAdvanced Engineering Materials, 2006
- Modeling of Internal Dose Distributions during SR-89 Treatment of a Patient with Bone MetastasesCancer Biotherapy and Radiopharmaceuticals, 1997