Improved Bipolar Resistive Switching of HfOx/TiN Stack with a Reactive Metal Layer and Post Metal Annealing
Authors:
- Pang-Shiu ChenPCPang-Shiu Chen
- Heng-Yuan LeeHLHeng-Yuan Lee
- Yu-Sheng ChenYCYu-Sheng Chen
- Frederick ChenFCFrederick Chen
- Ming-Jinn TsaiMTMing-Jinn Tsai
- 1 April 2010
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 49 (4S) , 04DD18
Abstract
Improvement of a reactive metal layer (AlCu, Ti, or Ta) for the bipolar resistance switching (BRS) performance of HfO x based resistive memory (RM) with TiN as electrodes are studied in this work. After appropriate post metal annealing (PMA), the reactive metal layer with high oxygen content serves as an embedded resistor and modifies the insulator properties of theses stacked layers, which show stable repetitive switching through by the migration of oxygen ions in HfO x layer during operation. The Gibbs free energy for the oxidation of the reactive metal with respect to that of HfO2 dominates the optimal PMA temperature for the devices with stable BRS. Except for the reduction of forming voltage and leakage current, the AlCu layer with high resistance after PMA of 500 °C is beneficial for the devices with successive BRS and on/off ratio of 4. The forming voltage of the Ti devices seems insensitive on the PMA. Compared with the Ta device, the Ti/HfO x RM device after the PMA of 450 °C for 5 min exhibits a different current–voltage behavior during the first RESET voltage sweep and a higher resistance ratio (>40). These results are attributed to the higher affinity of oxygen in the Ti capping layer. The combination of HfO x with a reactive metal and an enough PMA shows great potential for future nonvolatile memory application.Keywords
This publication has 24 references indexed in Scilit:
- Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and ChallengesAdvanced Materials, 2009
- Observation of the Creation and Annihilation of Local Current Paths in HfO2 Thin Films on Pt by Ultrahigh-Vacuum Conductive Atomic Force Microscopy: Evidence of Oxygen Spill Over during the Forming ProcessJapanese Journal of Applied Physics, 2009
- $\hbox{HfO}_{x}$ Bipolar Resistive Memory With Robust Endurance Using AlCu as Buffer ElectrodeIEEE Electron Device Letters, 2009
- Effect of thermal treatment on resistive switching characteristics in Pt/Ti/Al2O3/Pt devicesSurface and Coatings Technology, 2008
- Characteristics and mechanism of conduction/set process in TiN∕ZnO∕Pt resistance switching random-access memoriesApplied Physics Letters, 2008
- Uniform resistive switching with a thin reactive metal interface layer in metal-La0.7Ca0.3MnO3-metal heterostructuresApplied Physics Letters, 2008
- Resistance Switching Behaviors of Hafnium Oxide Films Grown by MOCVD for Nonvolatile Memory ApplicationsJournal of the Electrochemical Society, 2008
- Effect of Top Electrode Material on Resistive Switching Properties of $\hbox{ZrO}_{2}$ Film Memory DevicesIEEE Electron Device Letters, 2007
- Low-Power Switching of Nonvolatile Resistive Memory Using Hafnium OxideJapanese Journal of Applied Physics, 2007
- Hysteretic current–voltage characteristics and resistance switching at a rectifying Ti∕Pr0.7Ca0.3MnO3 interfaceApplied Physics Letters, 2004