PM synchronous machine drive response to asymmetrical short-circuit faults
Authors:
- 1 September 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 622-629
Abstract
This paper investigates the impact of machine topology and parameters on the fault-mode characteristics of permanent magnet synchronous machines (PMSMs) exposed to asymmetrical short-circuit (ASC) faults, one of the most dangerous faults in terms of peak current amplitudes and demagnetization risks. Simulations using an equivalent circuit model combined with finite element (FE) analysis are used to explore the differences between the ASC fault-mode responses of three major types of PM machines. The effects of several different rotor and winding configurations have been studied to identify the key machine parameters that have a major influence on the fault current amplitudes. Results indicate that fractional-slot concentrated winding PM machines tend to exhibit lower peak currents compared to distributed winding machines during ASC fault events. Finally, the results from three different types of short circuit faults are summarized and compared for several PM machine configurations to provide information that will be helpful for choosing the best machine for new applications.Keywords
This publication has 10 references indexed in Scilit:
- Demagnetization characteristics of permanent magnet synchronous machines2014
- Investigation of key factors influencing the response of permanent magnet synchronous machines to three-phase symmetrical short-circuit faults2014
- Analysis and Experimental Verification of a Fault-Tolerant HEV PowertrainIEEE Transactions on Power Electronics, 2013
- Interior permanent magnet synchronous machine rotor demagnetization characteristics under fault conditions2013
- Analytical modeling of balanced and unbalanced short-circuits of SMPM motors — Analyses of currents, torque and PM eddy-current losses2013
- Winding Inductances of Fractional Slot Surface-Mounted Permanent Magnet Brushless Machines2008
- Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated WindingsIEEE Transactions on Industry Applications, 2005
- Fault Tolerant Three-Phase AC Motor Drive Topologies: A Comparison of Features, Cost, and LimitationsIEEE Transactions on Power Electronics, 2004
- IPM synchronous machine drive response to symmetrical and asymmetrical short circuit faultsIEEE Transactions on Energy Conversion, 2003
- Analysis of PM synchronous motor drive failures during flux weakening operation1996