The issue of technological quality assurance of boring surfaces of products made of corrosion-resistant aluminum alloys is considered. A detailed analysis of the negative factors affecting the process of boring holes in aluminum alloy products has been performed. The study was conducted in order to develop a method for boring holes in products made of corrosion-resistant aluminum alloys, which reduces the size and frequency of build-up on the cutting part of the tool. The process of boring holes in products made of corrosion-resistant aluminum alloys using high-frequency wave action and the roughness of the internal surfaces of the products are studied. A method for boring holes in products made of corrosion-resistant aluminum alloys is proposed, in which the direction of the high-frequency wave action is opposite to the direction of chip flow. As a confirmation of the operability of the proposed processing method, an experimental study of the process of boring holes using high-frequency wave action was performed. The achieved results of the work make it possible to assess in more detail the effect of high-frequency wave action on the frequency of build-up forming, its magnitude and, thus, the roughness of the treated surface. The necessary quality parameters of the surface are provided when performing a high-frequency wave action in the direction opposite to the direction of the chip flow vector.