Efficient Production of Wild and Non-Edible Brassica juncea (L.) Czern. Seed Oil into High-Quality Biodiesel via Novel, Green and Recyclable NiSO4 Nano-Catalyst
Open Access
- 17 August 2022
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 14 (16) , 10188
Abstract
In the current study, a novel green nano-catalyst from Tragacanth gum (TG) was synthesized and used for sustainable biodiesel production from Brassica juncea (L.) Czern. seed oil. Brassica juncea (L.) Czern contains 30% oil on dry basis and free fatty acid content of 0.43 mg KOH/g. Physiochemical characterization of a newly synthesized nano-catalyst was performed by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Transmission Electron Microscopy (TEM), and Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The XRD results showed an average crystalline size of 39.29 nm. TEM analysis showed the cluster form of NiSO4 nanoparticles with a size range from 30–50.5 nm. SEM analysis of the catalyst showed semispherical and ovoid shapes with surface agglomeration. The synthesized catalyst was recovered and re-used in four repeated transesterification cycles. Maximum biodiesel yield (93%) was accomplished at 6:1 methanol to oil molar ratio, catalyst concentration of 0.3 wt%, at 90 °C for 120 min at 600 rpm using Response Surface Methodology (RSM) coupled with central composite design (CCD). Brassica juncea (L.) Czern. biodiesel was characterized by Thin Layer Chromatography (TLC), FT-IR, Nuclear Magnetic Resonance (NMR) (1H, 13C), and Gas Chromatography-Mass Spectroscopy (GCMS) analytical techniques. The major fatty acid methyl esters were 16-Octadecenoic acid and 9-Octadecenoic acid methyl ester. The fuel properties, i.e., flash point (97 °C), density (825 kg/m3 at 40 °C), kinematic viscosity (4.66 mm2/s), pour point (–10 °C), cloud point (–14 °C), sulfur content (66 wt.%), and total acid number (182 mg KOH/g) were according to the International biodiesel standards. The reaction kinetic parameters were determined, and all the reactions followed Pseudo first-order kinetics. It was concluded that non-edible Brassica juncea (L.) Czern. seed oil is one of the sustainable candidates for the future biofuel industry using a cleaner, reusable, and highly active Ni-modified TG nano-catalyst.Keywords
Funding Information
- Taif University, Saudi Arabia (TURSP-2020/32)
- HEC (SRGP-10767)
This publication has 69 references indexed in Scilit:
- Process optimization and kinetics of biodiesel production from neem oil using copper doped zinc oxide heterogeneous nanocatalystBioresource Technology, 2015
- Biodiesel Production from Spent Frying Oil of Fish via Alkali-catalyzed TransesterificationEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2013
- Current biodiesel production technologies: A comparative reviewEnergy Conversion and Management, 2012
- Transesterification double step process modification for ethyl ester biodiesel production from vegetable and waste oilsFuel, 2012
- Green synthesis of zinc oxide nanoparticles by aloe barbadensis miller leaf extract: Structure and optical propertiesMaterials Research Bulletin, 2011
- Influence of Fatty Acid Methyl Esters on Fuel properties of Biodiesel Produced from the Seeds Oil of Curcubita pepoNigerian Journal of Basic and Applied Sciences, 2011
- Indian Mustard (Brassica juncea L.) Seeds in Health2011
- Identification, FT-IR, NMR (1H and 13C) and GC/MS studies of fatty acid methyl esters in biodiesel from rocket seed oilFuel Processing Technology, 2011
- Optimization of heterogeneous biodiesel production from waste cooking palm oil via response surface methodologyBiomass and Bioenergy, 2011
- Esterification of used vegetable oils using the heterogeneous WO3/ZrO2 catalyst for production of biodieselBioresource Technology, 2010