Method for Evaluating Electrically Actuated Hybrid Wing–Body Control Surface Layouts
Authors:
- 1 November 2015
- journal article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 52 (6) , 1780-1790
Abstract
Hybrid wing–body configurations are currently an active field of research as potential candidates to meet NASA Environmentally Responsible Aviation goals. One characteristic of these configurations is the presence of a large number of redundant flight control surfaces. However, the design process and decision rationale for a given control surface layout is rarely discussed in the open literature. This work investigated tradeoffs between drag, control authority, actuator weight, and actuation power requirements as a function of the number and spacing of elevons. The actuators were sized based on hinge moments computed during nominal and failed control flight conditions. These effects were propagated upward to estimate changes to fuel burn, a system-level metric important to the Environmentally Responsible Aviation program, via the Breguet range equation. A model of the NASA N2A-EXTE hybrid wing–body configuration concept was used to demonstrate these tradeoffs. The study concluded that adjacent elevons could be combined to achieve reductions in weight, power usage, and fuel burn. This resulted in a reduced number of elevons from the baseline and unequal span fractions.
Keywords
This publication has 20 references indexed in Scilit:
- A Conceptual Design and Optimization Method for Blended-Wing-Body Aircraft2012
- Conceptual Design of an N+3 Hybrid Wing Body Subsonic Transport2010
- Trailing-Edge Flap Optimization for Lift Distribution Control2008
- Drag Reduction Methodology for Adaptive Tailless Aircraft2006
- Wind Tunnel Test of an RPV with Shape-Change Effector and Sensor Arrays2004
- Flight Dynamics and Control of an Aircraft with Segmented Control Surfaces2004
- Design of the Blended Wing Body Subsonic TransportJournal of Aircraft, 2004
- Investigating Segmented Trailing-Edge Surfaces for Full Authority Control of a UAV2003
- A Computational Design Engine for Multi-Disciplinary Optimisation with Application to a Blended Wing Body Configuration2002
- The challenge and promise of blended-wing-body optimization1998