Fabricating Laser-Induced Periodic Surface Structures on Medical Grade Cobalt–Chrome–Molybdenum: Tribological, Wetting and Leaching Properties
Open Access
- 13 August 2019
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 7 (8) , 70
Abstract
Hip-implants structured with anti-bacterial textures should show a low-friction coefficient and should not leach hazardous substances into the human body. The surface of a typical material used for hip-implants, namely Cobalt–Chrome–Molybdenum (CoCrMo) was textured with different types of laser-induced periodic surface structures (LIPSS)—i.e., low spatial frequency LIPSS (LSFL), hierarchical structures consisting of grooves superimposed with high spatial frequency LIPSS (HSFL) and Triangular shaped Nanopillars (TNP)—using a picosecond pulsed laser source. The effect of LIPSS on the wettability, friction, as well as wear of the structures, when slid against a polyethylene (PE) counter surface and biocompatibility was analyzed. Surfaces covered with LSFL show superhydrophobicity and grooves with superimposed HSFL, as well as TNP, show hydrophobic behavior. The coefficient of friction (CoF) of LIPSS against a polyethylene (PE) counter surface was found to be higher (ranging from 0.40 to 0.66) than the CoF of (polished) CoCrMo, which was found to equal 0.22. It was found that the samples release cobalt within biocompatible limits. Compared to polished reference surfaces, LIPSS cause higher friction of CoCrMo against PE contact. However, the wear of the PE counter surface only increased significantly for the LSFL textures. For these reasons, it is concluded that LIPSS are not suitable for a heavily loaded metal-on-plastic bearing contact.Keywords
Funding Information
- H2020 Marie Skłodowska-Curie Actions (675063)
This publication has 39 references indexed in Scilit:
- CoCrMo metal-on-metal hip replacementsPhysical Chemistry Chemical Physics, 2012
- Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser AblationLangmuir, 2011
- Towards Friction Control using laser-induced periodic Surface StructuresPhysics Procedia, 2011
- Origin of the Selective Cr Oxidation in CoCr Alloy SurfacesThe Journal of Physical Chemistry Letters, 2010
- Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laserApplied Surface Science, 2009
- Cell Shape Dynamics in Escherichia coliBiophysical Journal, 2008
- How useful is SBF in predicting in vivo bone bioactivity?Biomaterials, 2006
- Comparison of metal release from various metallic biomaterials in vitroBiomaterials, 2005
- High-Temperature Oxidation of Co-10 w/o Cr AlloysJournal of the Electrochemical Society, 1969
- Contact anglesDiscussions of the Faraday Society, 1948