Facile synthesis of mesoporous composite Fe/Al2O3–MCM-41: an efficient adsorbent/catalyst for swift removal of methylene blue and mixed dyes
Authors:
- 9 March 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (15) , 7567-7579
Abstract
In situ incorporation of mesoporous Al2O3 (meso-Al2O3) into the MCM-41 extraframework without blocking the pores generates an ordered, long range and high surface area mesoporous support Al2O3–MCM-41 (AM). The mesoporous support surprisingly shows high surface area as compared to pristine MCM-41. The incorporation of meso-Al2O3 into the extraframework of MCM-41 through the silanol group is evidenced by FTIR, 27Al MAS NMR and 29Si MAS NMR spectroscopy. The result shows that Si/Al ratio 10 (AM 10) possesses improved textural properties as compared to AM 50 and AM 90. Iron is incorporated onto the surface of AM 10 in order to modify the surface property of AM 10, forming composite Fe/Al2O3–MCM-41 (Fe/AM 10). Characterization by small angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N2 adsorption–desorption measurements reveals that the mesoporous support and iron incorporated support possess large BET surface area (207–1244 m2 g−1), narrow pore size (2.4–2.7 nm) and high pore volume (0.370–2.37 cm3 g−1). Among them, AM 10 shows highest surface area (1244 m2 g−1), narrow pore size (2.7 nm) and pore volume (2.37 cm3 g−1). The incorporation effect of both meso-Al2O3 and iron in the formation of Fe/AM 10 has been well established by 27Al MAS NMR spectroscopy. X-Ray photoelectron spectroscopy study confirms the 2+ state of iron in Fe/AM 10 and also establishes the incorporation of meso-Al2O3 and iron. Among the prepared mesoporous supports and different wt% of iron incorporated supports, it is seen that 5 Fe/AM 10 (‘5’ denotes the wt% of iron) has high adsorption as well as photo-Fenton degradation activity for MB. Moreover, 5 Fe/AM 10 is not merely a good adsorbent but also an efficient catalyst in the adsorption and photo-Fenton degradation (100%) of MB in 15 and 5 minutes, respectively. Furthermore, in the case of mixed cationic and anionic dyes (uniform mixture of methylene blue and methyl orange), MO adsorption and degradation (by photo-Fenton process) occur appreciably on the surface of MB through cationic–anionic interaction of MB and MO.Keywords
This publication has 61 references indexed in Scilit:
- Liquid-phase oxidation of benzene and phenol on MCM-41 mesoporous molecular sieves modified with iron and cobalt compoundsPetroleum Chemistry, 2009
- Synthesis, characterization and catalytic properties of NiMo/Al2O3–MCM-41 catalyst for dibenzothiophene hydrodesulfurizationCatalysis Today, 2008
- Effect of framework Si/Al ratio and extra-framework aluminum on the catalytic activity of Y zeoliteApplied Catalysis A: General, 2007
- A 27Al MAS NMR study of a sol–gel produced alumina: Identification of the NMR parameters of the θ-Al2O3 transition alumina phaseSolid State Nuclear Magnetic Resonance, 2007
- Mechanism of phenol decomposition on Fe C TiO2 and Fe TiO2 photocatalysts via photo-Fenton processJournal of Photochemistry and Photobiology A: Chemistry, 2006
- Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide PrecursorsChemistry of Materials, 2004
- Comparison of Mesoporous Zn−Al−MCM-41 and Al−MCM-41 Molecular Sieves in the Production of p-Cymene by Isopropylation of TolueneIndustrial & Engineering Chemistry Research, 2004
- The catalytic effect of boron substituted ZSM-5 and MCM-41 molecular sieves on 1-octene isomerizationMicroporous and Mesoporous Materials, 2003
- Synthesis of iron-containing MCM-41Journal of the Chemical Society, Chemical Communications, 1995
- Oxidation of chlorobenzene with Fenton's reagentEnvironmental Science & Technology, 1991