Mechanical properties of geopolymer concrete with partial replacement of fly ash by agricultural waste ashes
Open Access
- 13 June 2025
- journal article
- research article
- Published by Springer Nature in Discover Civil Engineering
- Vol. 2 (1) , 1-17
Abstract
Concrete, primarily composed of cement, contributes substantially to environmental degradation due to high CO₂ emissions. With cement production increasing by approximately 7% annually, geopolymer concrete (GPC) offers a sustainable alternative. By using industrial waste ashes as a primary binder instead of cement, GPC reduces energy consumption, mitigates waste disposal issues, and significantly lowers carbon emissions. This study assessed the effects of Rice Husk Ash (RHA), Cassava Peel Ash (CPA), and Sugarcane Bagasse Ash (SCBA) as partial replacements for Fly Ash (FA) in GPC, focusing on compressive and split tensile strengths. The mix preparation involved an alkaline solution prepared in advance, combined with FA, RHA, SCBA, CPA, sharp sand, and granite in a 1:1 liquid-to-solid ratio. The mix was cast, oven-cured for 4 h, and tested at 7, 14, and 28 days. The 100% Fly Ash (FA) mix achieved the highest compressive strength of 2.3 N/mm2 at 28 days due to its low SiO₂/Al₂O₃ ratio (0.28) and high alumina content, which promote efficient geopolymerization. In terms of tensile strength, the 50% FA + 50% CPA mix exhibited the highest value of 0.65 N/mm2 at 28 days, surpassing the 100% FA mix (0.30 N/mm2) and the 50% FA + 50% SCBA mix (0.60 N/mm2). The relatively low strength values are attributed to the short 4-h curing period, which limited full geopolymerization. This study demonstrates that using agricultural waste ashes in geopolymer concrete promotes sustainability and highlights how SiO₂/Al₂O₃ ratios influence compressive and tensile strength, guiding optimized mix designs.Keywords
This publication has 57 references indexed in Scilit:
- Potential of geopolymers in rigid pavement application: materials, preparation, and basic properties2024
- State of the art review on the production and bond behaviour of reinforced geopolymer concreteLow-carbon Materials and Green Construction, 2023
- Eco-friendly agro-waste based geopolymer-concrete: a systematic reviewDiscover Materials, 2023
- Development of Geopolymer Foam Concrete Incorporating Sugarcane Bagasse Ash and Fly Ash; 100% Recycled and Cement-Less ConcreteArabian Journal for Science and Engineering, 2022
- Effect of the SiO2/Al2O3 Molar Ratio on the Microstructure and Properties of Clay-based Geopolymers: A Comparative Study of Kaolinite-based and Halloysite-based GeopolymersClays and Clay Minerals, 2022
- The role of Na2O dosage in iron-rich fly ash geopolymer mortarArchives of Civil and Mechanical Engineering, 2022
- Rubberized geopolymer composites: A comprehensive reviewCeramics International, 2022
- A Review on the Effect of Silica to Alumina Ratio, Alkaline Solution to Binder Ratio, Calcium Oxide + Ferric Oxide, Molar Concentration of Sodium Hydroxide and Sodium Silicate to Sodium Hydroxide Ratio on the Compressive Strength of Geopolymer ConcreteSilicon, 2021
- Effect of the Ratio SiO2/Al2O3 on the Structure, Properties, and Thermal Stability of Geopolymer Refractory MaterialsGlass and Ceramics, 2018
- Kinetics of geopolymerization: Role of Al2O3 and SiO2Cement and Concrete Research, 2007