Enhanced Wettability and Thermal Stability of a Novel Polyethylene Terephthalate-Based Poly(Vinylidene Fluoride) Nanofiber Hybrid Membrane for the Separator of Lithium-Ion Batteries
- 31 July 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (31) , 26400-26406
Abstract
In this study, a novel membrane for the separator in a lithium-ion (Li-ion) battery was proposed via a mechanically pressed process with a poly(vinylidene fluoride) (PVDF) nanofiber subject and polyethylene terephthalate (PET) microfiber support. Important physical properties, such as surface morphology, wettability, and heat stability were considered for the PET-reinforced PVDF nanofiber (PRPN) hybrid separator. Images of scanning electron microscopy (SEM) showed that the PRPN hybrid separator had a homogeneous pore size and high porosity. It can wet out in battery electrolytes completely and quickly, satisfying wettability requirements. Moreover, the electrolyte uptake was higher than that of dry-laid and wet-laid nonwovens. For heat stability, no shrink occurred even when the heating temperature reached 135 °C, demonstrating thermal and dimensional stability. Moreover, differential scanning calorimetry (DSC) showed that the PRPN hybrid separator possessed a shutdown temperature of 131 °C, which is the same as conventional separators. Also, the meltdown temperature reached 252 °C, which is higher than the shutdown temperature, and thus can protect against internal cell shorts. The proposed PRPN hybrid separator is a strong candidate material for utilization in Li-ion batteries.Keywords
This publication has 35 references indexed in Scilit:
- Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteriesJournal of Power Sources, 2013
- A novel polyethylene terephthalate nonwoven separator based on electrospinning technique for lithium ion batteryJournal of Membrane Science, 2013
- Renewable and Superior Thermal-Resistant Cellulose-Based Composite Nonwoven as Lithium-Ion Battery SeparatorACS Applied Materials & Interfaces, 2012
- Separator technologies for lithium-ion batteriesJournal of Solid State Electrochemistry, 2010
- Development of microporous PE films to improve lithium ion batteriesPolymer Journal, 2010
- Nanostructured Materials for Electrochemical Energy Conversion and Storage DevicesAdvanced Materials, 2008
- A review on the separators of liquid electrolyte Li-ion batteriesJournal of Power Sources, 2007
- Battery SeparatorsChemical Reviews, 2004
- Review of gel-type polymer electrolytes for lithium-ion batteriesJournal of Power Sources, 1999
- Characterization of microporous separators for lithium-ion batteriesJournal of Power Sources, 1999