Real-Time Estimation of Intake O 2 Concentration in Turbocharged Common-Rail Diesel Engines
- 8 April 2013
- journal article
- Published by SAE International in SAE International Journal of Engines
- Vol. 06 (1) , 237-245
Abstract
Automotive engines and control systems are more and more sophisticated due to increasingly restrictive environmental regulations. Particularly in both diesel and SI lean-burn engines NOx emissions are the key pollutants to deal with and sophisticated Engine Management System (EMS) strategies and after-treatment devices have to be applied. In this context, the in-cylinder oxygen mass fraction plays a key-role due its direct influence on the NOx formation mechanism. Real-time estimation of the intake O₂ charge enhances the NOx prediction during engine transients, suitable for both dynamic adjustments of EMS strategies and management of aftertreatment devices.The paper focuses on the development and experimental validation of a real-time estimator of O₂ concentration in the intake manifold of an automotive common-rail diesel engine, equipped with turbocharger and EGR system. The paper analyzes the air intake process and the influence of the exhaust gas recirculation system based on a mean value modeling approach. All variables required are available at EMS level, thus allowing an on-board implementation without extra costs for additional sensors.The accuracy of the developed estimator is assessed by comparing simulated and experimental trajectories of O₂ concentration, measured by a Universal Exhaust Gas Oxygen (UEGO) sensor located in the intake manifold. The experimental tests were carried out at the test bench, imposing severe engine transients. The results evidence that the O₂ estimator presents a good accuracy versus experiments and offers significant opportunities for improving engine control and after-treatment devices management during transient operation.Keywords
This publication has 15 references indexed in Scilit:
- Neural Network Based Models for Virtual NO x Sensing of Compression Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 2011
- Semiempirical in-cylinder pressure based model for NOX prediction oriented to control applicationsApplied Thermal Engineering, 2011
- Modelling diesel engines with a variable-geometry turbocharger and exhaust gas recirculation by optimization of model parameters for capturing non-linear system dynamicsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011
- Development of recurrent neural networks for virtual sensing of NOx emissions in internal combustion enginesSAE International Journal of Fuels and Lubricants, 2009
- Fast Oxygen Based Transient Diesel Engine OperationSAE International Journal of Engines, 2009
- Air fraction estimation for multiple combustion mode diesel engines with dual-loop EGR systemsControl Engineering Practice, 2008
- Effects of Control Parameters on Performance and Emissions of HSDI Diesel Engines: Investigation via Two Zone ModellingOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2007
- NOx Virtual Sensor Based on Structure Identification and Global OptimizationSAE International Journal of Advances and Current Practices in Mobility, 2005
- An Integrated System of Models for Performance and Emissions in SI Engines: Development and IdentificationSAE International Journal of Advances and Current Practices in Mobility, 2003
- Intake oxygen concentration estimation for DI diesel engines2003