Shear strength anisotropy of natural London Clay
Authors:
- 1 February 2007
- journal article
- Published by Emerald Publishing in Géotechnique
- Vol. 57 (1) , 49-62
Abstract
The paper reports the shear strength anisotropy of the natural, highly overconsolidated, London Clay from Heathrow Terminal 5 as established by comprehensive hollow cylinder apparatus (HCA) testing. Multiple high-quality block samples from 5·2 m and 10·5 m below ground level provided samples for suites of undrained stress-path shear tests performed after consolidation to effective stress states similar to those estimated in situ. The direction of the major principal stress axis, α (or of the principal stress increment, αdσ), and relative magnitude of the intermediate principal stress, b = (σ2 − σ3)/(σ1 − σ3), were chosen as the controlled stress-related variables and their influence on the peak shear strength was investigated. Strong shear strength anisotropy was proven, and a potential effect of the parameter b was also detected. With b = 0·5, for example, a minimum was noted in peak q/p′ at around α = 45–67°, and the maximum value, which was larger by some 40%, developed at α = 0°. A limited set of data obtained with larger test specimens suggested a possibility that loading with α = 90° could also lead to relatively low shear strength. The pre-failure pore water pressure development reflected anisotropy of the deformation characteristics at smaller strains and contributed to the total-stress undrained shear strength anisotropy. Regarding the influence of b, the Mohr–Coulomb failure line passing through the data for b = 0 or 1 provided a lower bound of all the data for a given value of α. The investigation of anisotropy was extended to deeper horizons of the stratum through profiling tests involving triaxial extension and simple shear conditions. Although the results confirmed the general patterns of anisotropy observed at 5·2 and 10·5 m below ground level, the degree of anisotropy appeared to become stronger with depth.Keywords
This publication has 18 references indexed in Scilit:
- The stiffness of natural London ClayGéotechnique, 2007
- The influence of structure on the behaviour of London ClayGéotechnique, 2007
- Characteristics of the London Clay from the Terminal 5 site at Heathrow AirportGéotechnique, 2007
- Principle of axial shear apparatusGéotechnique, 1998
- Delayed collapse of cut slopes in stiff clayGéotechnique, 1997
- Simple Shear Testing on Sand in a Torsional Shear ApparatusSoils and Foundations, 1988
- The effect of weathering on the strength of London ClayQuarterly Journal of Engineering Geology, 1988
- Joints and Fissures in the London Clay at Wraysbury and EdgwareGéotechnique, 1969
- Properties of the London Clay at the Ashford Common Shaft: in-Situ and Undrained Strength TestsGéotechnique, 1965
- Undisturbed Samples of London Clay from the Ashford Common Shaft: Strength–Effective Stress RelationshipsGéotechnique, 1965