Analysis of detectable angles of yarn hairiness in optical measurements
Authors:
- 26 August 2016
- journal article
- research article
- Published by SAGE Publications in Textile Research Journal
- Vol. 87 (11) , 1297-1307
Abstract
Obstructed by the yarn core, the detectable length and the detection rate of a hairy fiber are mainly determined by the geometry of the yarn and the location of the fiber in an optical system. This paper presents a new theoretical method of analyzing detectable angles of yarn hairiness in optical measurements. Firstly, a cylindrical model of the yarn core is constructed by using the yarn diameter, and spiral lines on the cylinder are drawn using the twist angle of the yarn. Secondly, hairy fibers are simulated by short-line segments passing a spiral line and the Z-axis of the model. The yarn model is projected onto a plane under the assumption of a collimated light source, which is the condition similar to that of optical measurements. The yarn model is cut by a plane parallel to the axes of the Cartesian coordinate system (XOY) at the emergence points of hairy fibers. Finally, the relationship between the hairiness length and other factors, such as the test length, yarn diameter and detectable angle (i.e. the angle at which hairy fiber can be detected) is established. It has been demonstrated that the detection angle dictates not only the length of each hairiness but also the rate of detectable hairiness in the scene. Given a detectable angle, the upper and lower limits of detectable hairiness lengths can be predicted. The verification results of the detection rate by three measurement methods indicate that the detection rates of optical measurements have a certain guidance function for correcting the hairiness results of optical measurements.Keywords
This publication has 13 references indexed in Scilit:
- Image processing and analysis algorithms for yarn hairiness determinationMachine Vision and Applications, 2012
- Measurement of yarn hairiness by digital image processingThe Journal of the Textile Institute, 2010
- An Artificial Neural Network-based Hairiness Prediction Model for Worsted Wool YarnsTextile Research Journal, 2009
- Yarn hairiness parameterization using a coherent signal processing techniqueSensors and Actuators A: Physical, 2008
- Simulation of photosensor-based hairiness measurement using digital image analysisThe Journal of the Textile Institute, 2008
- Comparative Evaluation of Yarn Hairiness by Different MethodsTextile Research Journal, 1988
- YARN HAIRINESSTextile Progress, 1983
- A New Method for the Determination of Yarn Hairiness by Digital FibrographTextile Research Journal, 1978
- Application of a New Hairiness Meter to the Study of Sources of Yam HairinessTextile Research Journal, 1971
- A Method for the Determination of Hairiness of YarnTextile Research Journal, 1963