Study on pressure field characteristics of high specific speed axial flow pump under full working conditions based on wavelet transform
- 1 February 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Abstract
Axial flow pumps are widely used in ship jet propulsion units and coastal plain pumping stations. In the actual operation process, axial flow pumps need to operate in extreme working conditions, in order to explore the safety and stability of axial flow pumps operating under special working conditions, this paper adopts a method that combines model experiment and numerical simulation. A full-condition model experiment of the axial flow pump section (AFPS) is carried out on the high-precision axial flow pump system test platform. Meanwhile, a simulation model predicting the full characteristics of the AFPS is constructed. Numerical simulations are carried out for the AFPS at 31 flow rates, and the hydrodynamic characteristics of the AFPS are investigated in depth in 8 conditions, which reveals the internal evolution of the AFPS under the synergistic influence of the water flow direction and the impeller steering in the whole quadrant. The traditional analysis method Fast Fourier Transform is difficult to analyze the dynamic changes of such a complex non-smooth signal in the flow field under full operating conditions of axial flow pumps. In this paper, the wavelet transform is used to analyze the pressure pulsation signals in the time–frequency two-dimensional plane at multiple scales, to capture the time–frequency subtle changes, and the cross wavelet transform reveals the signal relationships at different locations, which comprehensively and deeply reveals the pressure pulsation spatiotemporal transformation characteristics of the pump section. The results show that when the water flow direction is opposite to the rotation direction of the impeller, the internal flow of the AFPS is disordered and the pressure pulsation is strong. Except for the forward flow turbine condition when the impeller is rotating forward (OP4) condition, the wavelet energy at the impeller inlet is greater than that at the impeller outlet with a maximum difference of eight times (OP5). The pressure pulsation between the inlet and outlet of the impeller has a large number of common frequencies.Keywords
Funding Information
- National Natural Science Foundation of China (51376155)
- Postgraduate Research & Practice Innovation of Jiangsu Province (KYCX23_3548)
- Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
- Jiangsu Government Scholarship for Studying Abroad
- Yangzhou University Excellent Doctoral Dissertation Fund
This publication has 31 references indexed in Scilit:
- Influence of gate cutoff effect on flow mode conversion and energy dissipation during power-off of prototype tubular pump systemEnergy, 2024
- Effect of particle size on vortex structure and erosion behavior of semi-open centrifugal pumpEnergy, 2024
- Transient simulation of reversible pump turbine during pump mode's starting upJournal of Energy Storage, 2023
- Cavitation mechanism and effect on pump power-trip transient process of a pumped-storage unitJournal of Energy Storage, 2023
- Flow instability and energy performance of a coastal axial-flow pump as turbine under the influence of upstream wavesEnergy, 2023
- Experimental and numerical simulation research on flow characteristics of model pump-turbine in four-quadrant operating quadrantsJournal of Energy Storage, 2022
- Energy loss mechanisms of transition from pump mode to turbine mode of an axial-flow pump under bidirectional conditionsEnergy, 2022
- Influence of double-inlet design on the flow-head characteristics of axial-flow pumpJournal of Hydrodynamics, 2021
- Stochastic dynamic modeling and simulation of a pump-turbine in load-rejection processJournal of Energy Storage, 2021
- Intelligent diagnosis method for a centrifugal pump using features of vibration signalsNeural Computing and Applications, 2008