Design and optimizations of solenoid magnetic structure for inductive power transfer in EV applications
Authors:
- 1 November 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 001459-001464
Abstract
Based on magnetic induction, wireless power transfer have been proved to be promising in many applications, especially in EV charging systems. The coupling performance of loosely coupled transformers determines the overall feasibility of the whole systems. Considering volume, cost and coupling properties, a solenoid magnetic structure of 400mm*600mm with a 200mm air gap is utilized to transfer power in this study. By FEM simulation tools, the distance of wires and the coverage length are discussed to find the best coupling design. In addition, the position of the magnetic stripe cores is analyzed when taking account of the system cost. Moreover, additional shielding devices, which are made of aluminum, are designed to eliminate the back leakage magnetic flux. In order to improve the coupling performance, flux guiding ferrites are also added into the shielding devices to guide more leakage to flow to the secondary windings. Simulation results indicate the proposed design can increase the coupling coefficient k dramatically. Also, experimental results show great agreement with the simulation results.Keywords
This publication has 15 references indexed in Scilit:
- Coil Design and Shielding Methods for a Magnetic Resonant Wireless Power Transfer SystemProceedings of the IEEE, 2013
- Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging SystemsIEEE Transactions on Industrial Electronics, 2011
- Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer SystemsIEEE Transactions on Power Electronics, 2011
- A new IPT magnetic coupler for electric vehicle charging systems2010
- Compact contactless power transfer system for electric vehicles2010
- Inductive coupler for contactless power transmissionIET Electric Power Applications, 2008
- A Three-Phase Inductive Power Transfer System for Roadway-Powered VehiclesIEEE Transactions on Industrial Electronics, 2007
- Design Considerations for a Contactless Electric Vehicle Battery ChargerIEEE Transactions on Industrial Electronics, 2005
- Contactless energy transmission system for linear servo motorIEEE Transactions on Magnetics, 2005
- 10 kHz inductively coupled power transfer - concept and control1994