Location-controlled-grain Technique for Monolithic 3D BEOL FinFET Circuits
Authors:
- 1 December 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 11.3.1-11.3.4
Abstract
A location-controlled-grain technique is presented for fabricating BEOL monolithic 3D FinFET ICs over SiO 2 . The grain-boundary free Si FinFETs thus fabricated exhibit steep sub-threshold swing (<;70mV/dec.), high driving currents (n-type: 363 μA/μm and p-type: 385 μA/μm), and high I on /I off (>10 6 ). According to simulation, the thickness of the interlayer dielectric plays an important role and shall be thicker than 250nm so that the sequential pulse laser crystallization process does not heat the bottom devices and interconnects to more than 400 °C.Keywords
This publication has 4 references indexed in Scilit:
- Location-Controlled Single-Crystal-Like Silicon Thin-Film Transistors by Excimer Laser Crystallization on Recessed-Channel Silicon Strip With Under-Layered NitrideIEEE Electron Device Letters, 2016
- Monolithic 3D integration of logic and memory: Carbon nanotube FETs, resistive RAM, and silicon FETs2014
- High-performance tri-gate poly-Ge junction-less p- and n-MOSFETs fabricated by flash lamp annealing process2014
- Electrical property of coincidence site lattice grain boundary in location-controlled Si island by excimer-laser crystallizationThin Solid Films, 2005