Tree Stem Diameter Estimation from Mobile Laser Scanning Using Line-Wise Intensity-Based Clustering
Open Access
Abstract
Diameter at breast height has been estimated from mobile laser scanning using a new set of methods. A 2D laser scanner was mounted facing forward, tilted nine degrees downwards, on a car. The trajectory was recorded using inertial navigation and visual SLAM (simultaneous localization and mapping). The laser scanner data, the trajectory and the orientation were used to calculate a 3D point cloud. Clusters representing trees were extracted line-wise to reduce the effects of uncertainty in the positioning system. The intensity of the laser echoes was used to filter out unreliable echoes only grazing a stem. The movement was used to obtain measurements from a larger part of the stem, and multiple lines from different views were used for the circle fit. Two trigonometric methods and two circle fit methods were tested. The best results with bias 2.3% (6 mm) and root mean squared error 14% (37 mm) were acquired with the circle fit on multiple 2D projected clusters. The method was evaluated compared to field data at five test areas with approximately 300 caliper-measured trees within a 10-m working range. The results show that this method is viable for stem measurements from a moving vehicle, for example a forest harvester.Keywords
This publication has 24 references indexed in Scilit:
- Terrestrial laser scanning in forest inventoriesISPRS Journal of Photogrammetry and Remote Sensing, 2016
- Non Destructive Method for Biomass Prediction Combining TLS Derived Tree Volume and Wood DensityForests, 2015
- Outlook for the Next Generation’s Precision Forestry in FinlandForests, 2014
- Tree Stem and Height Measurements using Terrestrial Laser Scanning and the RANSAC AlgorithmRemote Sensing, 2014
- Automated Stem Curve Measurement Using Terrestrial Laser ScanningIEEE Transactions on Geoscience and Remote Sensing, 2013
- Estimating single-tree branch biomass of Norway spruce with terrestrial laser scanning using voxel-based and crown dimension featuresScandinavian Journal of Forest Research, 2013
- The influence of scan mode and circle fitting on tree stem detection, stem diameter and volume extraction from terrestrial laser scansISPRS Journal of Photogrammetry and Remote Sensing, 2013
- Individual tree biomass estimation using terrestrial laser scanningISPRS Journal of Photogrammetry and Remote Sensing, 2013
- Estimation of stem attributes using a combination of terrestrial and airborne laser scanningEuropean Journal of Forest Research, 2012
- Three-dimensional reconstruction of stems for assessment of taper, sweep and lean based on laser scanning of standing treesScandinavian Journal of Forest Research, 2004