Experimental Analysis of High Temperature PEEK Materials on 3D Printing Test
Authors:
- Sun XiaoyongSXSun Xiaoyong
- Cao LiangchengCLCao Liangcheng
- Ma HonglinMHMa Honglin
- Gao PengGPGao Peng
- Bai ZhanweiBZBai Zhanwei
- Li ChengLCLi Cheng
- 1 January 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 13-16
Abstract
As a kind of semi crystalline thermoplastic engineering plastics, Polyetheretherketone (PEEK) has excellent mechanical properties and chemical stability. Aiming at the high temperature properties of PEEK, test and analysis of PEEK fused 3D printing performance was carried out by the fused deposition modeling(FDM), the experimental research date has been obtained by the effect of temperature on the mechanical properties and forming precision, the sheet forming. The result shows that adjusting the hot bed temperature, ambient temperature and filling ratio, it can improve the bonding strength, and it ultimately can improve the mechanical properties and the printing precision of PEEK. Compared to the PLA material, the maximum tensile strength of PEEK reached up to around 77Mpa, which was much larger than the tensile strength of PLA, and has good forming properties in thin layer parts. The analysis of this paper provides an effective basis for the analysis of high temperature 3D material PPEK printing, and provides a new solution for the performance control of high temperature material 3D printing.Keywords
This publication has 10 references indexed in Scilit:
- Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffoldsComposites Part B: Engineering, 2016
- Polyetheretherketone (PEEK) for medical applicationsJournal of Materials Science: Materials in Medicine, 2016
- Interfacial mechanical behavior of 3D printed ABSJournal of Applied Polymer Science, 2016
- Improving PEEK bioactivity for craniofacial reconstruction using a 3D printed scaffold embedded with mesenchymal stem cellsJournal of Biomaterials Applications, 2016
- Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABSMaterials, 2015
- Novel ABS-based binary and ternary polymer blends for material extrusion 3D printingJournal of Materials Research, 2014
- CAD/CAM System and Experimental Study of Biological 3D Printing Composite ProcessJournal of Mechanical Engineering, 2014
- Comparative between FEM Models for FDM Parts and their Approach to a Real Mechanical BehaviourProcedia Engineering, 2013
- Hierarchical starch-based fibrous scaffold for bone tissue engineering applicationsJournal of Tissue Engineering and Regenerative Medicine, 2008
- Anisotropic material properties of fused deposition modeling ABSRapid Prototyping Journal, 2002