Understanding water dynamics in operating fuel cells by operando neutron tomography: investigation of different flow field designs
Open Access
- 1 April 2024
- journal article
- research article
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 6 (2) , 025021
Abstract
Water management plays a key role in ensuring optimum polymer electrolyte fuel cell (PEFC) performance, and flow field design can influence the ability of a cell to balance maintaining hydration, whilst avoiding flooding and cell failure. This work deepens the understanding of water evolution in different PEFC flow channel designs, namely single serpentine (SS), double serpentine (DS) and parallel, using our novel high-speed neutron computed tomography method. We developed our previously-reported method by introducing continuous cell rotation, enabling 18 s per tomogram during 1 h holds at 300, 400 and 500 mA cm−2. The volume of water evolved in the cathode, membrane electrode assembly and anode was quantified, and key mechanisms for water droplet formation in the different flow channel designs were elucidated. The parallel flow field design had the poorest water management, with 47% of the cathode flow channel becoming filled after 1 h at 400 mA cm−2. This significant flooding blocked reactant sites and contributed to unstable cell performance and, ultimately, cell failure at higher current densities. The SS cell displayed the best water management, with only 11% of the cathode channel filled with water after 1 h at 500 mA cm−2, compared with 28% of the DS cathode channel. 3D visualisation and analysis of droplet behaviour elucidated how water ‘slugs’ in the SS were removed in the gas stream, whereas three of the four parallel cathode flow channels became entirely filled with water plugs, blocking gas flow and exacerbating cell flooding. The new insights gained here are expected to extend to novel flow field designs and image-based models, with the use of operando neutron CT demonstrated as a powerful technique for both visualising and quantifying water management in operating PEFCs, as well as deepening the knowledge of droplet behaviour in different flow field types.Keywords
Funding Information
- Royal Academy of Engineering
- Engineering and Physical Sciences Research Council (EP/T517793/1)
- Faraday Institution (FIRG058)
This publication has 42 references indexed in Scilit:
- Machine learning based fault detection and state of health estimation of proton exchange membrane fuel cellsEnergy and AI, 2023
- Degradation prediction of proton exchange membrane fuel cell stack using semi-empirical and data-driven methodsEnergy and AI, 2022
- Electro-thermal mapping of polymer electrolyte membrane fuel cells with a fractal flow-fieldEnergy Conversion and Management, 2021
- Use of X-ray computed tomography for understanding localised, along-the-channel degradation of polymer electrolyte fuel cellsElectrochimica Acta, 2020
- PEMFC Flow‐field Design, Channel/land Width Ratio OptimizationFuel Cells, 2020
- Local impact of load cycling on degradation in polymer electrolyte fuel cellsApplied Energy, 2020
- Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water managementApplied Energy, 2017
- Flow field bipolar plates in a proton exchange membrane fuel cell: Analysis & modelingEnergy Conversion and Management, 2017
- The Hydro-electro-thermal Performance of Air-cooled, Open-cathode Polymer Electrolyte Fuel Cells: Combined Localised Current Density, Temperature and Water MappingElectrochimica Acta, 2015
- Transient observation of 2H labeled species in an operating PEFC using neutron radiographyElectrochemistry Communications, 2008