The Effect of Trace Oxygen Addition on the Interface Behavior of Low-Alloy Steel
Authors:
- Vlastimil NovákVNVlastimil Novák
- Lenka ŘeháčkováLŘLenka Řeháčková
- Petra VáňováPVPetra Váňová
- Michal SniegoňMSMichal Sniegoň
- Dalibor MatýsekDMDalibor Matýsek
- Kateřina KonečnáKKKateřina Konečná
- Bedřich SmetanaBSBedřich Smetana
- Silvie RosypalováSRSilvie Rosypalová
- Markéta TkadlečkováMarkéta Tkadlečková
- Ľubomíra DrozdováĽDĽubomíra Drozdová
- Petr KlusPKPetr Klus
Open Access
Abstract
This work aims to assess the effect of an oxygen content graded in minimal quantities, on the order of hundreds of ppms, on the determination of surface tension of low-alloy FeCOCr and FeCONi steels in contact with a corundum substrate. Oxygen, as a surface-active element, was segregated at the surface where it interacted with the major components of the alloys, leading to a reduction in surface tension. The sessile drop method was used for wetting tests in the temperature range from steel liquidus temperatures to 1600 °C under nonoxidizing conditions. The effect of oxygen on surface tension and wetting angles was verified by statistical analysis using the Kruskal–Wallis test, which supported the results stating that the values of these quantities decreased with increasing oxygen content. Furthermore, liquidus temperatures, which are of practical importance, were determined by the optical and DTA methods and then compared with theoretically calculated temperature values. It turned out that the increased chromium content causes difficulties in determining surface tension up to 1550 °C due to the formation of a thin Cr2O3 layer. In addition, SEM and XRD analyses accompanied by calculations in the FactSage oxide database were performed to better understand the wetting mechanism.Keywords
Funding Information
- Ministry of Education, Youth and Sports (CZ.02.1.01/0.0/0.0/17_049/0008399, SP2021/68, SP2021/41)
This publication has 45 references indexed in Scilit:
- Effect of oxygen content on impact toughness of a fine-grained magnesium alloyMaterials Letters, 2011
- Diffusion of chromium in sapphire: The effects of electron beam irradiationJournal of Crystal Growth, 2011
- The growth behavior of austenite grain in the heating process of 300M steelMaterials Science and Engineering: A, 2011
- Surface Tension of Liquid Iron as Functions of Oxygen Activity and TemperatureISIJ International, 2011
- Surface tension of molten Ni-(Cr, Co, W) alloys and segregation of elementsTransactions of Nonferrous Metals Society of China, 2008
- Wetting Characteristics of Liquid Fe–19%Cr–10%Ni Alloys on Dense Alumina SubstratesISIJ International, 2008
- Surface Tension and Wettability of Liquid Fe-16 mass%Cr-S Alloy with AluminaMATERIALS TRANSACTIONS, 2003
- Surface Tension and Wettability of Liquid Fe-16 mass%Cr-O Alloy with AluminaMATERIALS TRANSACTIONS, 2002
- Reaction Mechanism in Alumina/Chromia (Al 2 O 3 –Cr 2 O 3 ) Solid Solutions Obtained by CoprecipitationJournal of the American Ceramic Society, 2000
- Use of Ranks in One-Criterion Variance AnalysisJournal of the American Statistical Association, 1952