Bump Magnets for Injection System in SESRI
- 23 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Abstract
The Space Environment Simulation and Research Infrastructure (SESRI), located at the Harbin Institute of Technology (HIT) in China, is a new infrastructure project proposed by the Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS), and completed in 2022. As a critical part of SESRI, the compact synchrotron was designed with a circumference of less than 44 m and compact magnets. In order to achieve compact injection and improve injection efficiency, four fast-ramping bump magnets based on ferrite yokes were used. All four bump magnets have a fast falling time from 20–100 µs, a maximum magnetic field of 0.0797 T, and a gap of 60 mm. To reduce the magnetic eddy current effect and coil inductance during fast excitation, ferrite core structures with single copper bar saddle windings are used. Further, window-frame structures are used to facilitate the ferrite-core machining process. After the prototype bump magnet was fabricated and the pulsed magnetic field measured, it was found that the integrated magnetic field curve did not align with the output current curve of the power supply. This was found to be caused by eddy currents from the copper gaskets between ferrite cores. Through the simulation and secondary testing of the gasket-induced eddy currents using different materials, the eddy current has been significantly reduced. In this study, the magnetic field optimization, structural design, eddy current calculation, and magnetic field measurement of the fast-ramping bump magnets are analyzed.Keywords
Funding Information
- Research on Performance Stability of Magnet of China (E239591S, RO)
This publication has 7 references indexed in Scilit:
- The 300 MeV proton and heavy ion accelerator complex for SESRI project in ChinaNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2022
- Eddy current and structural analysis of the beam pipe for the BRing dipole magnetJournal of Instrumentation, 2022
- Design and field measurement of dipole magnets for a 300-MeV proton and heavy ion synchrotron in SESRIJournal of Instrumentation, 2022
- Analysis of Coupled Electromagnetic–Thermal Effects in Scanning-Magnet for SESRIIEEE Transactions on Applied Superconductivity, 2022
- Optimization design and test of the Booster Ring dipole magnet in HIAFJournal of Instrumentation, 2022
- SESRI 300MeV Proton and Heavy Ion AcceleratorJournal of Physics: Conference Series, 2019
- The design of the 300 MeV proton microprobe system in HarbinNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2017