A Lumped-Element Unit Cell for Beam-Forming Networks and Its Application to a Miniaturized Butler Matrix
- 11 March 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 61 (4) , 1477-1487
Abstract
A lumped-element unit cell for designing compact beam-forming networks (BFNs) is proposed. It is a reciprocal four-port network, which is lossless, isolated, and matched at all ports. The unit cell is designed to behave as planar and compact directional couplers with both arbitrary output amplitude and phase distributions, as well as crossovers with arbitrary output phase distributions. For both cases, design equations are derived. The design procedure is validated numerically and experimentally through several examples. The versatility of the unit cell allows the design of BFNs using only the proposed network topology. As an example, a 4$\,\times\,$ 4 Butler matrix is implemented. A strong size reduction is also achieved with respect to classical designs thanks to the lumped-element implementation. The prototype footprint is approximately 25 times smaller than typical transmission-line-based Butler matrices. The structure shows also a very small area compared to state-of-the-art miniaturized 4$\,\times\,$ 4 Butler matrix designs. Measurement results confirm the behavior of the Butler matrix as a BFN. The achieved bandwidth is approximately 8%.Keywords
This publication has 31 references indexed in Scilit:
- A lumped-element directional coupler with arbitrary output amplitude and phase distributions2012
- New wideband integrated miniature branchline coupler for beamforming applications2012
- Homogenization of tensor TL metamaterialsMetamaterials, 2011
- An 8$\,\times\,$8 Butler Matrix in 0.13-$\mu{\hbox {m}}$ CMOS for 5–6-GHz Multibeam ApplicationsIEEE Transactions on Microwave Theory and Techniques, 2011
- Tensor Transmission-Line MetamaterialsIEEE Transactions on Antennas and Propagation, 2010
- Full-Wave Verification of Tensor TL MetamaterialsIEEE Antennas and Wireless Propagation Letters, 2010
- Design And Breadboarding Of Wideband Nxn Butler Matrices For Multiport Amplifiers2005
- Rigorous and efficient fabrication-oriented CAD and optimization of complex waveguide networksIEEE Transactions on Microwave Theory and Techniques, 1997
- Analysis and design of lumped- and lumped-distributed-element directional couplers for MIC and MMIC applicationsIEEE Transactions on Microwave Theory and Techniques, 1992
- Butler network extension to any number of antenna portsIEEE Transactions on Antennas and Propagation, 1970