TRANSPORT PHENOMENA IN STACKS OF INTERRUPTED PARALLEL-PLATE SURFACES
Authors:
- 1 January 1987
- journal article
- research article
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 1 (2) , 127-140
Abstract
A scale-up model of interrupted fin surfaces in compact exchanger cores is employed for pressure loss and heat transfer study in a wind tunnel. Offset strip- and slotted-type interruptions are considered together with the plain plate fin for comparison. The physical dimensions of the fin surfaces and enclosing core and the flow rate are varied to closely simulate both the physical and operating conditions in actual compact heat exchangers. It is found that the offset strip fin is superior to both the slotted and plain straight fins in heat transfer/ pressure drop performance. The f and j correlation equations are derived for the offset strip fin cores. Two kinds of performance enhancement are identified and their mechanisms are explored.Keywords
This publication has 7 references indexed in Scilit:
- Numerical and experimental studies on a two-dimensional model of an offset-strip-fin type compact heat exchanger used at low Reynolds numberInternational Journal of Heat and Mass Transfer, 1985
- Measurements of Heat Transfer and Pressure Drop for an Array of Staggered Plates Aligned Parallel to an Air FlowJournal of Heat Transfer, 1980
- Experiments on heat transfer and pressure drop for a pair of colinear, interrupted plates aligned with the flowInternational Journal of Heat and Mass Transfer, 1978
- Three kinds of heat transfer augmentation in perforated surfacesLetters in Heat and Mass Transfer, 1978
- Heat Transfer and Fluid Flow Analysis of Interrupted-Wall Channels, With Application to Heat ExchangersJournal of Heat Transfer, 1977
- Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Rectangular Offset-Fin Plate-Fin Heat ExchangersJournal of Heat Transfer, 1975
- Heat Transfer and Friction Loss Performance of Perforated Heat Exchanger SurfacesJournal of Heat Transfer, 1975