Temperature Dependence of Oxygen Release from LiNi0.6Mn0.2Co0.2O2 (NMC622) Cathode Materials for Li-Ion Batteries
Open Access
- 7 September 2018
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165 (11) , A2869-A2879
Abstract
Promising cathode materials for Li-ion batteries are layered transition metal oxides (LiNixMnyCozO2, NMC). Here, we will investigate the temperature dependence of oxygen release from NMC622, caused by the transformation of the near-surface structure from the layered to spinel and/or rock-salt structure. We will demonstrate that oxygen release is not a potential driven process but occurs once ∼81% of the lithium ions are removed from the NMC structure. Consequently, the onset potential for oxygen release in NMC-graphite cells decreases only by ∼60 mV from 4.42 V at 25°C to 4.36 V at 50°C, which is simply due to lower overpotentials at higher temperature. The amount of evolved oxygen increases significantly with increasing temperature, indicating the formation of thicker spinel/rock-salt surface layers. As the released oxygen causes chemical oxidation of the electrolyte, the amounts of CO2 and CO occurring simultaneously with O2 release also increase with temperature. Further experiments in NMC-Li cells as well as with 13C-labelled ethylene carbonate (EC) electrolyte show that CO2 evolved prior to O2 release results from i) EC hydrolysis and ii) electrolyte impurity oxidation. In agreement with the onset potentials for oxygen release, we will show that stable cycling of NMC622-graphite full-cells is possible at the different temperatures up to ∼81% state-of-charge.Keywords
This publication has 54 references indexed in Scilit:
- Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive CarbonThe Journal of Physical Chemistry Letters, 2017
- Future high-energy density anode materials from an automotive application perspectiveJournal of Materials Chemistry A, 2017
- Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2(NMC) Cathode Materials for Li-Ion BatteriesJournal of the Electrochemical Society, 2017
- Review—Electromobility: Batteries or Fuel Cells?Journal of the Electrochemical Society, 2015
- Future generations of cathode materials: an automotive industry perspectiveJournal of Materials Chemistry A, 2015
- Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass SpectroscopyACS Applied Materials & Interfaces, 2014
- Quantifying the promise of lithium–air batteries for electric vehiclesEnergy & Environmental Science, 2014
- Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion BatteriesAdvanced Energy Materials, 2013
- Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteriesJournal of Power Sources, 2013
- Transmission Electron Microscope Studies of LiNi[sub 1/3]Mn[sub 1/3]Co[sub 1/3]O[sub 2] before and after Long-Term Aging at 70°CElectrochemical and Solid-State Letters, 2008